广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 1. Summarize Summarize Thank you for purchasing our Light Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage.
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. ● Make sure the power supply voltage are consistent with this lights,Ensure the use of voltage is in the range of the request technical parameter. ●before the installation, please check the light’s fasteners and mechanical structure have been received in good condition and appear no damage.
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. PWM Dimmer 1 500HZ(16666 grades) Control Signal D MX512 Control mode s tand alone/ Master slave mode Channel 38CH,30CH,23CH,23CH-2,18CH,18CH-2,11CH,6CH,5CH Function Effect: Smooth dimmer, strobes, gradual change, rainbow effect , autos, auto programming...
Page 5
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. Illustrations:The same numbers represent the same group. 38CH 30CH CHANN CHANN NAME NAME DIM ALL...
Page 6
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. STROBE EFFECT AUTO SPEED VIRTUAL COLOR WHEEL DIMMER MODE ID FUNCTION ID ADDRESS 23CH 23CH. 18CH 18CH. CHANN CHANN NAME NAME DIM ALL DIM ALL STROBE EFFECT ! "...
Page 7
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. AUTO SPEED VIRTUAL COLOR WHEEL DIMMER MODE STROBE ID FUNCTION EFFECT ID ADDRESS AUTO SPEED VIRTUAL COLOR WHEEL DIMMER MODE ID FUNCTION ID ADDRESS 11CH CHANNE CHANNE NAME CHANNEL NAME NAME DIM ALL...
Page 8
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. STROBE No strobe Not synchronous strobe(slow to 6-20 fast) 21-60 Synchronous strobe(slow to fast) 61-10 Electronic Sine wave(slow to fast) 101-1 Random Strobe(slow to fast) 141-1 Opening pulse(slow to fast) 181-2 Closing pulse(slow to fast)
Page 9
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 121-1 AUTO 14(0-17S) 126-1 AUTO 15(0-12.25S) 131-1 AUTO 16(0-12.25S) 136-1 AUTO 17(0-25S) 141-1 AUTO 18(0-25S) 146-1 AUTO 19(0-25.5S) 151-1 AUTO 20(0-255S) 156-1 AUTO 21(0-25.5S) 161-1 AUTO 22(0-12.25S) 166-1 AUTO 23(0-17S) 171-1 AUTO 24(0-25.5S) 176-1 AUTO 25(0-25.5S)
Page 10
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 231-2 CHASE3 236-2 SOUND 1:SOUND CHANGE COLOR SOUND 2:SOUND 241-2 STROBE(WHITE COLOR ONLY) 246-2 RESERVED AUTO SPEED 0-255 AUTO SPEED,FAST->SLOW VIRTUAL 0-10 No effect COLOR WHEEL (RGB color mixing instead of Blue (Blue=full,...
Page 11
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 251-2 Blue (Red=0, Green=0, Blue=full, White=0)(step) Use the dimmer mode which DIMMER MODE 0-10 menu had set up 11-20 Linear curve and not smooth 21-30 Square law curve and not smooth Inverse square law curve and not...
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. Yellow open from 1 to 6 then dark Blue open from 1 to 6 then dark Each piece change with RGBYPC Inverse direction AUTO 6 Inverse direction AUTO 7 3 White running with fade...
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. LOAD(Load) ST L S etting load) YES/NO PR L P rogram YES/NO load) SEND(Send) YES/NO 0-255 Illustrations: When enter to the “*” position displayed on the LED, the projector will automatically set as master and send data to external.
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 2) Press the U P/DOWN button to select 6 8CH 6 0CH 2 8CH 2 8CH. 2 3CH 2 3CH. 1 8CH d d d ...
Page 17
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 1) Press the E NTER button in C TST menu, then enter to the custom color setting. 2) Press the U P/DOWN select C T01 … C T10 2) Press the U P/DOWN...
Page 18
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. 6.12 LIGHTING SETTING PARAMETER RESET 1) Press the E NTER b utton in S T L m enu, then enter to the lighting setting parameter reset. 2) Press the U P/DOWN b utton to select...
Page 19
广州朗文光电有限公司 GUANGZHOU LONGMAN PRO LIGHT FACTORY CO,. LTD. will be actived.For example, if the fixture ID ADDRESS is 3 now,the valid value in the channel profile setting is 30-39. Similarly when 15 the valid value is 150-159. 7、 TROUBLESHOOTING PROBLEM REASON AND ACTION Check the power connection is correct or not.