WWW.DAISYLIGHT.COM 1.Summarization Ø Summarization Thank you for purchasing our LED PAR lighting. Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage.
WWW.DAISYLIGHT.COM Ø Safety instuction ● Make sure the power supply voltage are consistent with this lights,Ensure the use of voltage is in the range of the request technical parameter. ●before the installation , please check the light’s fasteners and mechanical structure have been received in good condition and appear no damage.
WWW.DAISYLIGHT.COM Ø auto run /master slave/interconnected multi-machine control Ø using switch power supply to protect the LED to work well Ø Built-in temperature control function, which will be reduce the output power intelligently when LED is too hot.
Page 6
WWW.DAISYLIGHT.COM 181—190 AUTO 8 191—200 AUTO 9 201—210 AUTO 10 211—255 Store CH10 0—255 Auto run speed (fast-slow, AUTO 1 - AUTO 10 Valid) CH11 0—10 User Dimmer mode set by menu ...
WWW.DAISYLIGHT.COM MENUà à 1M u At Menu【DISY】, Press【ENTER】to enter into display setting u Press【UP/DOWN】to choose【ON】 , 【1MINITE】 u Press【ENTER】to exit and store 7 . 10 Recover the original parameter setting LOAD(Recover the original ...
WWW.DAISYLIGHT.COM light change the led u check whether current limiting resistor is normal or not u Check constant current IC is normal or not (compared with the normal IC) Single color leds u...
Need help?
Do you have a question about the NPZ336-RGBAW and is the answer not in the manual?
Questions and answers