Advertisement
How to reset the Router to the original configuration:
1. Disconnect the power supply from the Router.
2. Locate a small hole on the back of the router to the right of the antenna as shown:
3. Push the push button inside of the hole with a thin clip and reconnect the power supply, then wait ten seconds , finish
by releasing the push button:
Figura 10
Figura 11
Important considerations:
Please review: Document: Fast Installation,
Security Configuration LP-5420G,
LP5420G_M123_ENC01
6
Wireless - Router - LP-5420G
www.lanpro.com
Advertisement
