Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Challenger SLDCRF
Summary of Contents for Challenger SLDCRF
- Page 1 Digital Wireless Lighting Cam SLDCRF User s Manual Version 0.1 01/Apr...
-
Page 2: Table Of Contents
Manual Contents: A. Camera kit contents B. SLDCRF overview C. Mounting the camera D. Setup Getting started E. Program the parameters F. Viewing images via PC and TV G. Control receiver box by remote controller H. Technical Specifications I. General information and safety... -
Page 3: Camera Kit Contents
A. Camera kit contents SLDCRF Digital Lighting Camera_Camera SLDCRF Receiver box SLDCRF Remote controller USB Cable AV out cable AC/DC adaptor CDROM, Content with SLDCRF Webcam driver User Manual... -
Page 4: Sldcrf Overview
B. SLDCRF overview 1. Front view of camera... - Page 5 Floodlight: It can be rotate and tilting to adjust the lighting area. The max rotation is +/-30 Deg, tilting angle is 10 Deg. Flood light screw: Release to open the flood light case to replace the halogen lamp Flood light cover: Open to replace lamp Halogen lamp: For lighting purpose, please use the correct voltage and wattage of halogen light for this product.
- Page 6 Wall mount bracket: Use to mount the SLDCRF to the wall by provided screws EVA foam: Install between wall and wall mount bracket to prevent the water leaking. 2. Control panel view of camera After open the front cover, you will find control panel as...
- Page 7 3. View of receiver box...
- Page 8 AV OUT socket: Video and Audio signal output port, connecting to provided AV cable to TV USB socket: To connect the USB cable from SLDCRF to PC to access the captured image/video. Infrared receiver: To receive the remote control signal...
- Page 9 Operation indicator: Shows the operation status of Camera and Receiver box. Blinking: Indicating data is transmitting from camera to receiver box. Light up: Indicating the SLDCRF is operating. LCD display CAMERA: Still image capture icon. Indicates your SLDCRF will capture a single image.
- Page 10 DATE: Indicates the SLDCRF is in Date setting. TIME: Indicates the SLDCRF is in Time setting. TIME OUT: Indicates the SLDCRF is in Time interval setting. FORMAT: Indicates the SLDCRF is in SD card Format...
- Page 11 4. View of Remote controller...
- Page 12 POWER button: Press once to turn on the power of Receiver box while power is off. Pressing and hold it 2 seconds to turn off the power of Receiver box while it is power on. It is same function of POWER button on the receiver box. AV button: When receiver box is connected to TV by provided AV cable, pressing and hold AV button 2 seconds to switch the receiver box to AV OUT mode...
- Page 13 Memory Options Up to 4GB SD card Your SLDCRF wireless lighting camera is equipped with 32MB built in SDRAM memory. Please note that the built in memory is only for storage buffer and data processing buffer only, the captured image or video cannot store on internal memory, please install the memory card to memory card slot of receiver box.
- Page 14 slot, the display will show Err to indicate non memory card installed. Also, it is not recommended that a card is inserted or removed during operation as this can cause malfunction.
-
Page 15: Mounting The Camera
C. Mounting the camera Mount the SLDCRF to a solid surface more than ½ or 12.7mm thick in a secure location overseeing the area to monitor. We suggest you mount the camera between 2 meters off the ground with the camera pointing at a downward angle 15 degrees. - Page 16 1. Connect the SLDCRF to AC power. Please make sure your SLDCRF is rated for your voltage before connection. Incorrect voltage will damage the camera. BLUE WIRE FOR NEUTRAL YELLOW / GREEN WIRE FOR EARTH BROWN WIRE FOR LIVE IMPORTANT...
- Page 17 2. Replacing the halogen lamp. CAUTION SLDCRF lamp will be very hot. Always disconnect the power to your SLDCRF before opening. Release the floodlight screw to open the floodlight cover. Carefully remove the Halogen lamp it may be HOT. Insert a new Halogen lamp making sure you do not touch the lamp with bare skin.
-
Page 18: Setup Getting Started
D. Setup getting started 1. Connecting the power to receiver box Place the receiver box at a desk or somewhere easy to access and easy for remote controller to access. Plug the provided AC adaptor to wall AC outlet as below Plug the small plug to receiver box DC 5V as below. - Page 19 2. Inserting SD card receiver box SD cards must not contain any other images and you must ensure your SLDCRF receiver box is power off when adding or removing an SD memory card, and make sure the SD card is unlock. Failure to observe these rules may result in malfunction.
- Page 20 The display of receiver box will show P10 and start counting down. Press the PAIR button of camera once. The display of receiver box will stop counting down and after 3 seconds, the operation indicator will turn on. SLDCRF Camera is now matched pair with receiver box.
- Page 21 AV cable to AV OUT of receiver box and AV IN of TV as below Changing the TV to play the AV The TV will show live footage of camera. Adjust the position of your SLDCRF if necessary, until the desired coverage area is achieved.
- Page 22 When you have completed the coverage area testing, please disconnect the AV cable from receiver box and TV, or press the SET button from the remote control unit to switch receiver box back to capturing mode.
-
Page 23: Program The Parameters
Image capture method Photo Video/Photo Floodlight control Auto Auto Video recording time 10 seconds 05 - 60 Your SLDCRF can be used straight away but before use you may wish to change some or all of the settings see the next sections. - Page 24 Press the UP or DOWN button to select the desired resolution HIGH / LOW or BASE And then press OK to save and exit to CAPTURING setting. 3. Set the capturing sequence Set the Still Image Mode. Your SLDCRF can be programmed to shoot 1~3 pictures per triggering.
- Page 25 The number of burst mode is 1P to 3P. Press OK to save your selection and exit to TIME OUT settings. Set the Video Mode: Your SLDCRF can program to record 5~60 seconds of video per triggering. After pressing the MENU button, press UP button twice to enter video setting mode.
- Page 26 01 to 59 minutes. Press the OK to save your selection and exit to Date & Time setting. 5. Set the Date and Time: This SLDCRF uses the 24hr military time format. The word TIME will be blinking on the display.
- Page 27 - dEL - blinking. Now press [MENU] to exit program setting and go back to status screen. NOTE: Settings and images stored on internal memory may be lost in the event of a power failure. Always ensure you reset your SLDCRF following a loss of power.
- Page 28 6. Deleting images without viewing screen After pressing the MENU button, press DWON button once to enter the delete mode. The word - dEL - is blinking. Press the OK button to enter the DELETE & FORMAT menu. Using the UP and DOWN buttons to select the desired function.
- Page 29 you will find the image counter is return to 00000 If you choose to format your memory, it will erase all images. This feature is particularly useful if you don t want to look through the images one at a time. To exit the delete setting, press UP or DN button to select NO-dl (No Delete) then press [MENU] to back to capturing mode.
-
Page 30: Viewing Images Via Pc And Tv
When connected the SD card will show as a removable hard drive and you can use Windows Explorer to see your SLDCRF captured images or video. You can copy the images to your PC or delete them from your PC... - Page 31 Press and hold the MENU button then plug the USB cable to USB socket of your receiver box, then release the MENU button The receiver box of our SLDCRF will automatically change to USB mode and the display will show USb. Your PC will setup automatically.
- Page 32 2. Viewing the image via your recevier box diectly on your Connect the provided AV cable to AV OUT of receiver box and AV IN of TV as below Change the TV to view the AV Channel Press the MENU button once to switch the receiver box to TV out mode.
- Page 33 3. Viewing a live image from SLDCRF Your SLDCRF can also be used as a web cam Please install the SLDCRF Webcam driver to your PC first. Install the provided CDROM to your PC, and then click SETUP. EXE to install the driver.
- Page 34 poor picture quality. Please try a different USB port or shorter cable.
-
Page 35: Control Receiver Box By Remote Controller
G. Control the receiver box by remote controller The Remote controller is a full operation infrared transmitter; you can use it to access the receiver box within 7 metre and +/- 12 deg. All the buttons functions and operation are same as the button of receiver box, please refer to Program the parameter section and view... -
Page 36: Technical Specifications
H. Technical Specifications 1. System Requirements and Compatibility Windows 2000/Me/XP/Vista/Win 7. Live viewing is not support with Win 7. Pentium 1GMHz or equivalent processor. 256MB SDRAM or above. VGA Video Card with 32MB RAM minimum Colour 32 bit or higher. Sound Card. - Page 37 2. Features and specification PIR detection angle 52 Deg and detection range up to Low Lux colour CMOS Image Sensor 1.3M pixels. Max Resolution: 1.3M pixels, 1280 x 800 pixels. 2 Capture options: Still image 1P to 3P burst capturing, and video recording Image performance for video stream: 20 fps at 640 x 480 pixels...
- Page 38 Floodlight tube is 300W, type R7S Auto light sensor. Infrared remote controller with full control buttons Product measurements: H300 x W170 x T85mm. Weight 1.2Kg, SLDCRF Camera only. Operating Environment: 14 to 104 deg F (-10 to 40 deg C). 20-85% relative humidity, non-condensation.
-
Page 39: General Information And Safety
Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers. Remove dirt or stains with a soft cloth dampened with water or mild detergent. Keep the SLDCRF in a dry and cool dust-free environment or container when it is NOT used. - Page 40 points or other risks. Do not touch the floodlight when the power is on, it is extremely hot.
-
Page 41: Fcc Information
J. FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. - Page 42 instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
- Page 44 Challenger Security Products 4 Arkwright Court Fylde Industrial Estate Blackpool Lancashire FY4 5DR Tel: 01253 791888 Fax: 01253 791887 Email: sales.challenger@adivision.co.uk Web: www.challenger.co.uk...