miGuard SPS260 Instructions

Solar Powered Siren
SPS260
INSTRUCTIONS
Rechargeable 3.7V
1200mAh Lithium Battery
Volume Setting
High
(default)
Siren Duration Setting
5
minutes
Introduction
These instructions should be read in conjunction with your miGuard Wireless
Burglar Alarm System Installation and Operating Instructions, and be retained
for future reference. The Siren can also be used as a standalone Alarm System
when connected to miGuard Sensors.
Positioning
Fit the Siren to the outside of the building in a position that is clearly visible and at a
height which is relatively inaccessible to an intruder.
Although the Siren is designed to work on any aspect wall, for optimum performance
try to avoid fixing it to a North facing wall, or to a wall with shadows cast by walls,
trees and roof overhangs.
For optimum radio signal reception mount the Solar Siren at a minimum distance of 1
metre away from any external or internal metalwork (drainpipes, gutters, radiators, etc)
Contents:
1 x Solar Powered Siren
1 x 3.7V/1200mAh Rechargeable Lithium Battery, 1 x 9V Alkaline Battery
Fixings and Instructions
9V
Start-up
Rear Cover Tamper Socket
Battery
Inner Tamper Switch
Alarm LED Indicators
Mute
2
minutes
* The Status LED flashes only when armed
Low
30 seconds
(default)
Rear
Anti-tamper
Switch
Sirens