Ozito PXCPPHTC-418 Instruction Manual

Ozito PXCPPHTC-418 Instruction Manual

Cordless pole pruner

Advertisement

CORDLESS
POLE PRUNER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Bar Length:
200mm
Cutting Length Max.:
170mm
Chain Speed:
3.76m/s
Oil Tank Capacity:
125ml
Length:
1.83 - 2.77m
Weight:
3.9kg
ozito.com.au
*
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
WHAT'S IN THE BOX
Pole
Chain
Guide Bar
Guide Bar Cover
Rear Handle
Pruner Head
Shoulder Strap
Auxiliary Handle
PXCPPHTC-418
0816

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXCPPHTC-418 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXCPPHTC-418

  • Page 1 Shoulder Strap Weight: 3.9kg ozito.com.au Auxiliary Handle PXCPPHTC-418 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    SETUP & PREPARATION KNOW YOUR PRODUCT CORDLESS POLE PRUNER 1. ASSEMBLY 1. Chain 2. Guide Bar 3. Oil Cap CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING 4. Side Cover OPERATIONS. 5. Pivoting Pruner Head Release 6.
  • Page 3: Tensioning The Chain

    2. TENSIONING THE CHAIN Fitting Pruner Head CAUTION: THE CHAIN HAS SHARP EDGES. FOR YOUR 1. Align the pruner head and OWN SAFETY, PLEASE WEAR WORK GLOVES. the motor head so the arrows on both coincide. 1. Loosen the chain cover lock.
  • Page 4 3. OIL 4. PREPARATION Adjusting the telescope length IMPORTANT: ONLY USE OIL THAT IS EXPRESSLY LABELLED 1. To unlock the telescopic tube lock, twist it in “CHAIN BAR OIL”. a clockwise direction while pointing the chain away from the user. 1.
  • Page 5: Inserting And Removing The Battery

    Removing the Pruner Head 1. (a) Pull and hold the Lock Motor Head Button to the right. (b) Turn the Pruner Head anti-clockwise so the arrows on the Motor Head and the Pruner Head coincide, allowing the Pruner Head to be removed. PXCPPHTC-418...
  • Page 6: Operation

    OPERATION Limbing 7. SWITCHING ON/OFF • Limbing is the process of removing the branches from a fallen tree. Switching On Check the direction in which a branch will bend before cutting it. Always 1. Hold the pruner firmly with both hands. cut on the opposite side to the bending direction so that the guide bar is not pinched in the cut.
  • Page 7: Maintenance

    Chain Replacement: The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging The chain can be purchased through Ozito spare parts or from your local Bunnings notes and procedures.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito chargers are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 9: Warranty

    Charge Time: 80min Weight: 4.28kg ozito.com.au PXCPPHTC-418 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS Our goods come with guarantees that cannot be excluded at law.
  • Page 10 SETUP & PREPARATION KNOW YOUR PRODUCT CORDLESS POLE HEDGE TRIMMER 1. ASSEMBLY 1. Blade 2. Trimmer Head CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS. Fitting Rear Handle 1. Push the rear handle fully onto tube aligning the internal prongs.
  • Page 11: Battery And Charging

    2. BATTERY & CHARGING Fitting Trimmer Head CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT CAUTION: THE BLADE HAS SHARP EDGES. FOR YOUR OWN DEVICE (RATED AT 30mA OR LESS). SAFETY, PLEASE WEAR WORK GLOVES. The purchased battery will be shipped in a low charge condition, and requires charging prior to use.
  • Page 12 3. PREPARATION Battery Charge Indicator Adjusting the telescope length The purchased battery is equipped with a 1. To unlock the telescopic tube lock, twist it in a battery charge indicator to show the state of clockwise direction while pointing the trimmer the battery charge.
  • Page 13 4. INSERTING & REMOVING THE BATTERY Pivoting the Trimmer Head Installing a Battery into the Pole Trimmer 1. Press the two pivoting 1. Align the ribs of the battery with head releases, one each the recess below the handle. side and adjust the angle of the trimmer head up or down to any of 7 positions.
  • Page 14 OPERATION Trimming 5. SWITCHING ON/OFF • W orking position. Maintain proper footing and balance and do not overreach. Switching On Wear safety goggles, non-slip footwear and rubber gloves when trimming. Hold 1. Hold the pole hedge trimmer firmly with both hands. the pole hedge trimmer firmly in both hands before turning the pole hedge trimmer on.
  • Page 15: Troubleshooting

    Sound pressure level • There are no user serviceable parts in the Pole Hedge Trimmer; if a fault is suspected, please contact Ozito customer service. Do not use in the rain or leave the pole hedge trimmer outdoors while raining.
  • Page 16 The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito chargers are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.

Table of Contents