Advertisement

Manual
GD-25LK01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GD-25LK01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Argus GD-25LK01

  • Page 1 Manual GD-25LK01...
  • Page 2: Table Of Contents

    General information ......................3 Introduction ......................3 Scope of delivery ....................3 Safety ..........................4 Intended use ......................4 2.1.1 Application area and local requirements ........... 4 2.1.2 Disposal ....................4 General notice ......................4 Danger and protection .................... 4 Product information ......................
  • Page 3: General Information

    General Information Introduction Thank you for buying an enclosure of our Argus-series. This USB 3.0 hard disk enclosure will protect your data for unauthorized access by password setting. The enclosures of the Argus-series comply to RoHS II. We recommend to read this manual before installing or using this device.
  • Page 4: Safety

    Take electric products away from childeren. Don´t pull out the power supply with wet or humid hands. Pull out the power supply from socket in case of longer non-use. Maintenance and cleaning only by authorized personnel. Manual GD-25LK01 4 of 13 03.02.2016...
  • Page 5: Product Information

    Storage temperature -40° C to 70° C Humidity 5% to 90%, non condensed Supported OS Windows 200/ XP/ Vista/ 7/ 8 Mac OS up from Version 9.1 Linux 2.4.2 Dimension 123,6 x 76,1 x 17,6mm Manual GD-25LK01 5 of 13 03.02.2016...
  • Page 6: Installation And Use

    GD-25LK01 enclosure. In case of a faulty enclosure the hard disk have to be mounted in another GD-25LK01 to get access to the data. In case of password loss is no further access possible. Please write down your password somewhere.
  • Page 7: Hardware Setup

    Green LED Lighted if enclosure is unlocked Flashing once for input confirmation Orange LED Lighted for password setting or change mode Red LED Lighted if enclosure is locked Flashing if password input is faulty Manual GD-25LK01 7 of 13 03.02.2016...
  • Page 8: Password Setup

    5. Enter the new password and confirm it by pushing the “Unlock” button. 6. Repeat step 5 7. Now the RED LED will go off and the GREEN LED will light. The password is changed successfully. Manual GD-25LK01 8 of 13 03.02.2016...
  • Page 9: Handling

    3. You can lock the device every time by pushing the „Lock“ button. Unlocking the device After all above described locks you unlock the device by entering your password and pushing the „Unlock“ button. Manual GD-25LK01 9 of 13 03.02.2016...
  • Page 10: Faq

    So, please write down your password and store it at a safety place. What if the enclosure is defective? You have to mount your hard disk to another GD-25LK01 to get access to your data. Your old password will be kept automatically.
  • Page 11: Maintenance

    Inter-Tech does not assume liability for all other matters. Please look also at our complete warranty terms on our website. Manual GD-25LK01 11 of 13 03.02.2016...
  • Page 12: Contact

    This product complies to the directives 2004/108/EG and 2011/65/EG of the council of the European Parliament and the Council of the European Union. The declaration of conformity will be shown on our website: Service & Support/ Downloads/ Declarations Manual GD-25LK01 12 of 13 03.02.2016...
  • Page 13 Manual GD-25LK01 13 of 13 03.02.2016...

Table of Contents