Pch-Fw Configuration; Thunderbolt(Tm) Configuration - Asus TUF Z270 Mark 1 User Manual

SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Configuration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_6(Gray)
SATA6G_1(Gray) - SATA6G_6(Gray)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.
3.6.7

Thunderbolt(TM) Configuration

The items in this menu allow you to configure Thunderbolt settings.
Intel Thunderbolt Technology
This item allows you to disable or enable the Intel Thunderbolt Technology.
Configuration options: [Fully Disabled] [Disabled] [Enabled]
ThunderBolt PCIe Support
This item allows you to disable or enable the ThunderBolt PCIe Support.
Configuration options: [Disabled] [Enabled]
3-18
Chapter 3: BIOS Setup