Washing Machine F841QW Installation & User Instructions – Please keep for future reference F841QS F841QB F841QW-F841QS-F841QB Important – Please read these instructions fully before installing or using These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
Program selection Electronic display Auxiliary functions Child Lock Cancelling Programme F841QS Finishing Programme F841QS Program Selection Guide F841QB User Instructions Before first use Preparing for a wash Error Signals Care and Maintenance Water inlet filters Pump filter Detergent drawer Siphon plug...
Safety Information Before use During use • This appliance is not to be used by children or • The installation of this appliance is best persons with reduced physical, sensory or mental carried out by 2 people. capabilities, Persons with lack of experience and •...
Parts If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Front Back 1. Detergent drawer 7.Packing bolt x 4 2. Top panel 8.Power lead 3. Start / Pause button 9.Drain hose 4. Program selection dial 10.Water inlet 5.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Caution: 2 people are required to unpack the washing machine, it is recommended that gloves are worn. a: Carefully remove all packaging materials includ- ing the foam base, dispose of correctly. Note: When opened, water droplets may be vis- ible in the drum etc.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Important: This washing machine MUST only be connected to a cold water supply. a: Connect the water inlet hose, the angled connec- tion attaches to the water inlet on the back of the washing machine.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Plug replacement (UK & Ireland only) Should you need to replace the plug; the wires in the power cable are coloured in the following way: Any electrical work that is required to install this Blue –...
Introduction of control panel You can use the liquid level determination plate when you want to wash your laundry with liquid detergent. You can use your liquid detergents in all programs without prewashing. Place the liquid de- tergent aparatus in the second compartment (which is available inside the machine) of the detergent drawer (*) and set the detergent amount.
Page 10
Introduction of control panel Sections Main wash detergent compartment: In this compartment, only materials like detergent (liquid or powder), lime preventer and such can be used. You can find the liquid deter- gent aparatus inside your machine at first installa- tion.
Introduction of control panel Program selection dial On the display panel, you can see With the program knob, you can select the program the washing delay timer of your with which you desire to wash your clothes. You can machine, speed setting of your select programs by turning the program knob in machine, the auxiliary functions both directions.
Page 12
Introduction of control panel Display Panel Washing Rinsing Additional Spinning Function Leds Finished Start/Pause button Auxiliary function button 2 Auxiliary function button 1 Spin speed adjustment button Delayed start auxiliary function...
Page 13
Introduction of control panel 1- Delay timer By using this auxiliary function, you can make your machine to start the washing operation with delays between “3h, 6h, 9h, 12h”. To use auxiliary function of delayed Auxiliary start: function button 1 - Press the delayed start button once.
Page 14
Introduction of control panel 2- Spin Speed Selection 4- Extra Rinse You can adjust the spin speed of your You can make additional rinse operation laundry with the spin speed setting on your laundry by using this additional button. function. When you select a new programme, the You may make the programme active by max.
Introduction of control panel To avoid programme flow from being affected if Your machine will stop by itself as soon as the programme buttons are pressed or programme programme you have selected finishes. button is turned when performing washing operation in your machine, child lock is available.
Page 16
Program Selection Guide Program Washing Prog. Deter- Type of laundry tem- Time gent load perature (mins) com- capacity (°c) part. (kg) Cotton 90° Very dirty, cotton and flax textiles. (Underwears, linen, tablecloth, towel 90° (maximum 4,0 kg), bedclothes, etc. 1&2 Pre-wash 60°...
User Instructions If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 slightly dirty clothes, do not pre-wash and put a small amount of detergent in compartment 2 of the detergent drawer. • For your excessively dirty clothes, select a a: Plug in the machine.
Error Signals If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Your machine is equipped with systems which will take the necessary precautions and warn you in case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 • You can reattach the pump cover in the reverse Before cleaning your washing machine. order that you removed it. a: Unplug your machine from the mains power supply.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Detergent drawer Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Drum Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. This objects lead to formation of rust stains in the drum.
Trouble Shooting If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 All repairs to the machine must be carried out by an authorised repair agent. When a repair is required or you are unable to eliminate the failure with the help of the information below: a: Unplug the machine.
Page 23
If you have damaged or missing parts, Trouble Shooting call the Customer Helpline: 0345 257 7271 FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Press the start/pause button.In order to stop the foam,dilute one table-spoon of softener in half liter of water and pour it in the detergent Too much detergent has been used.
If you have damaged or missing parts, Technical Specifications call the Customer Helpline: 0345 257 7271 Model / Item F841QW F841QB F841QS Power supply (220-240) V ~/50Hz (220-240) V ~/50Hz (220-240) V ~/50Hz Max working current 10 amp 10 amp...