Advertisement
How to Use
6. Close lid on empty carafe and place on warming plate.
7. Plug cord into outlet.
8. If a stronger brew is desired, press the brew strength button. The light will illuminate
for strong brew. Pressing the button a second time will set it back to regular brew.
9. Press the ON/OFF button to begin brewing. A beep will sound when brewing
is done. The warming plate will keep the coffee warm for 1–4 hours and then
automatically turn off. (See Auto Off section)
10. Once coffee grounds have cooled, open cover and dispose of used grounds.
Close cover.
CAUTION: To avoid personal injury, do NOT open lid on water tank during brewing.
NOTE: At any time the coffeemaker can be turned off by pressing the ON/OFF button.
Always unplug the unit when it is off.
Brewing 2-4 Cups
This feature slows the brewing time in order to extract the best flavor for a small
amount of coffee.
CAUTION: To avoid damage to appliance, do NOT operate without water.
1. Open cover and add the appropriate amount of water for 2–4 cups.
2. Place the filter basket in the coffeemaker.
3. Set permanent filter or 8–12 cup cone shaped paper filter into filter basket.
4. Add desired amount of ground coffee to permanent filter.
5. Close cover.
6. Close lid on empty carafe and put carafe on warming plate.
7. Plug cord into outlet.
8. Press the 2–4 cups button.
9. Press the ON/OFF button to begin brewing. A beep will sound when brewing
is done. The warming plate will keep the coffee warm for 1–4 hours and then
automatically turn off. (See Auto Off section)
10. Once coffee grounds have cooled, open cover and dispose of used grounds.
Close cover.
NOTE: Brew strength cannot be selected when brewing 2–4 cups. Coffee will be
brewed at regular strength.
Sneak-A-Cup
®
The Sneak-A-Cup
®
feature allows you to pour a cup of coffee from the carafe while
the coffee is brewing. When the carafe is removed the brewing process is paused.
Simply replace the carafe on the warming plate within 30 seconds and brewing
resumes.
NOTE: If the carafe is not replaced within 30 seconds the filter basket may overflow.
8
(cont'd)
Wards.com
How to Use
Auto Off
After brewing is complete, the warming plate will remain on 1–4 hours before automatically
turning off. You can choose how long to keep the warming plate operational by fol-
lowing these steps.
NOTE: If you do not change the Auto Off time, the coffeemaker will shut off after 2 hours.
1. With the unit plugged in and turned ON, press the auto off button. The amount of
time to keep warm will show on the digital display.
2. Press the auto off button as many times as needed to select the desired number
of hours to keep warm.
NOTE: When the unit is unplugged and plugged back in, auto warming will return to
the default of 2 hours.
Delayed Brewing
To delay brewing until a later time, follow the steps below.
NOTE: Make sure the current time is displayed on the clock. If it's not, follow the
instructions for setting the current time.
1. Follow steps 1–8 in the Brewing Coffee section.
2. Press the program (PROG) button. The program light will illuminate and the
digital display will show either 12:00 or the previous time set for delayed brewing
to start.
3. Press the hour, then minute buttons to set the time for brewing to begin.
NOTE: If the hour button is not pressed before the time stops flashing, the clock will
revert to the current time of day. If this happens, press the program button again to
re-enter this feature and change the delayed brewing start time
4. Press the auto button to activate the delayed brewing feature. The auto light will
illuminate.
To cancel delayed brewing, press the auto button and the light will shut off.
To check the start time for delayed brewing, press and hold the program (PROG)
button. Once released, the current time will display.
(cont'd)
1
888
557
3848
•
•
•
9
Advertisement
