Related Manuals for urmet domus 1362
Summary of Contents for urmet domus 1362
- Page 1 Mod. 1362 DS 1362-027 LBT 8146 DEDICATED MULTIFUNCTIONAL TELEPHONE Ref. 1362/6 INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
DECLARATION OF CONFORMITY 1.1 Elements .............6 6.1 Incoming call from external line ......32 The manufacturer, Urmet Domus S.p.A. whose legal offi ces are in via Bologna 188/C - 10154 Torino (TO), 1.2 Display ..............8 6.2 Divert and call back...........32 1.3 Switchboard services and special 6.3 Internal call ............32... - Page 3 NUMBER OR BUTTON Timed divert 2F + F1 + extension Director 2 top is a multifunctional analogue telephone designed for use with Agorà Urmet Domus PABXs and Query timed divert 3F + F1 is optimised for working with 1362/624 switchboards.
-
Page 4: Elements
FUNCTION BUTTONS 2 AND 3 SPACER ANCHORING HOLES HOOK LEVER (TABLE-TOP ARRANGEMENT) RESERVED USE CONNECTOR HANDSET/HEADPHONE WIRE CONNECTOR LINE WIRE CONNECTOR SPACER ANCHORING HOLES (WALL-MOUNTED ARRANGEMENT) RUBBER FEET HANDFREE MICROPHONE DSS MODULE INSTALLATION SEATS (Ref. 1362/61) DSS MODULE WIRE CONNECTOR DS1362-027 DS1362-027... - Page 5 1.2 DISPLAY BUTTON FUNCTION DESCRIPTION OF THE FUNCTION The telephone is provided with an LCD split into two parts: Press the ENGAGE LINE button to hang up the call in progress and engage the ENGAGE LINE dial line to make a new call. PAGING (*) This function is used to automatically switch the speaker of the called extension on.
-
Page 6: Call Management Buttons
1.7 PROGRAMMABLE BUTTONS AND SECOND AND THIRD FUNCTION BUTTONS The dial pad may be used as a normal telephone The PROGRAMMABLE BUTTONS are confi gured with default settings for using the 1362/624 PABX switchboard Button > character correspondence table dial pad and to enter letters and numbers in the and allow to engage the six dial lines (buttons F1 - F6) and to recall the fi... -
Page 7: Leds
FAST BLINKING CALL RECEPTION LINE this case. When replacing Urmet Domus Team 1.9 SIM CARD READER and Euro telephones, reverse the The Director 2 top telephone is provided with a SIM CARD 3,3V reader which allows to use or import (copy) SE+ and SE- signals in sockets of the corresponding directory to the telephone memory. -
Page 8: Wall-Mounted Confi Guration
Fit the spacer on the telephone base underneath the line cord in the specifi c grooves. 2.2 WALL-MOUNTED CONFIGURATION The telephone can be installed on the wall using Install the spacer on the base of the telephone two 5mm bolts (included) at the specifi c slots on as shown in the following fi... -
Page 9: Preliminary Telephone Activation Operations
Plug the headset into the handset socket and keep the handset on hook in position if this confi guration is • Agorà 6 - (PABX 1362/624) - default setting required. Refer to Urmet Domus sales or click on www.urmetdomus.it for more information. • Agorà 2 Mod2 (PABX 1372 Mod2) - future development. -
Page 10: Handset Volume
2.4.5 LANGUAGE DESCRIPTION OF THE OPERATION BUTTON DISPLAY The following procedure describes how to change the language. Ridigit Password Press OK to confirm. DESCRIPTION OF THE OPERATION BUTTON DISPLAY Ridigit Password Enter the new password again. In stand-by state, press and select user menu four times... -
Page 11: Ringer Melody
2.5.3 HANDFREE VOLUME 2.5.5 RINGER MELODY The procedure for adjusting the handfree volume is described below. The default value is 03. The volume The procedure for adjusting the ringer melody is described below. The default value is E. Six tones may be may be set to 5 levels, where 01 is the minimum value and 05 the maximum value. -
Page 12: Keys Setting
• Enter the external line number to be associated to the button. • Press OK to confi rm or to quit. The Trunk line number associated to the button may be from 0 to 9 for 1362/624 PABX. DS1362-027 DS1362-027... -
Page 13: Extension Association
The Extension (port) options relates to the number of the extension socket and not its fl exible number, applicable) and the time and date of the call: which may be from 1 to 40 for PABX 1362/624. • Select the Outgoing Calls function in the Call List sub-menu and press OK. -
Page 14: Restore Parameters Call List
4.4 RESTORE PARAMETERS (CALL LIST) 4.5.2 MODIFY A RECORD To edit an existing number or name: The procedure below explains how to clear the call list from the telephone memory. • Select Modify. • Enter the fi rst letter of the name. DESCRIPTION OF THE OPERATION BUTTON DISPLAY... -
Page 15: Using The Telephone
5. USING THE TELEPHONE 5.2 MAKING CALLS NORMAL MODE The Director 2 top telephone can be used in three different ways: • Engage the line and wait for the dial tone. • With handset. • Dial the extension number, the dial line access number followed by the number to be called or the service •... -
Page 16: Speed Dialling The Fi Rst 20 Numbers In The Phone Book
5.5.2 SPEED DIALLING THE FIRST 20 NUMBERS IN THE PHONE BOOK 5.9 MESSAGES ON DISPLAY The fi rst twenty numbers stored in the phone book may be speed dialled simply by pressing two buttons. If 0 is not included in the directory to select the dial line, select the dial line by pressing the keypad or using With the telephone off a programmed button (default F1, F2,…. -
Page 17: Kts Functions
6. KTS FUNCTIONS 7. TELEPHONE NETWORKS ON EXTERNAL LINES Director 2 top telephones may be enabled to work either in standard or KTS mode: the two mode differ by the 7.1 CALL ON EXTERNAL LINE way calls from external lines are answered. In standard mode, simply pick up the handset to answer a call. In To make a call on an external line: KTS mode, you will hear the dial tone when the handset is picked up. -
Page 18: Putting An External Call On-Hold To Make Another External Call
To put an external conversation on-hold and answer a second external incoming call: To pick up a parked call from any extension: • Press R and wait for the dial tone. The external user will hear the on-hold music and announcement. •... -
Page 19: Disa External Call Divert On Busy To Other Extension
To switch the function off: 8. TELEPHONE NETWORKS ON INTERNAL LINES • Press the dedicated button underneath the display. • Dial your extension number 41 ÷ 72 for extensions 1 ÷ 32. 8.1 INTERNAL CALL • Press the button to end after you hear the Service not active message confi rming that the service is To call an extension: not active. -
Page 20: Putting An External Call On-Hold To Make Another External Call
Press 2F and press F7 to switch from one conversation to another. 8.8 DIVERT CALL TO OTHER EXTENSION NOW Press R twice to shut down the active conversation and pick up the call on hold. This function is used to immediately divert all routed to your extension to another extension. A “divert” tone Hang up while the external call is in progress to end the external communication. -
Page 21: Other Functions
9 OTHER FUNCTIONS 9.5 PAGING DIRECTOR 2 TOP TELEPHONES The paging Director telephone functions is used to call, activate the speaker of called telephone and send a 9.1 FOLLOW-UP voice message to the called extension. With this function, all the calls routed to your extension may be diverted to another extension. The service is To access the paging service: activated from the second extension. -
Page 22: Pabx Call On-Hold
Insert your mobile phone SIM card in the specifi c slot on the front of the telephone before starting any of An Agorà 6 PABX (Ref. 1362/624) with installed answering function board (Ref. 1362/55) is needed for using the operations described below. The corresponding icon will appear on the display when the SIM card is the voice mail function. -
Page 23: Door Phone Functions
10. DOOR PHONE FUNCTIONS 10.5 OPENING AN OUTSIDE DOOR To open the door: The available door phone functions are described in this chapter. • Press • Enter the number of door to be opened 1/2/3. • Hang up. 10.1 CONNECTION TO THE DOOR PANEL To connect to the door panel: •... - Page 24 DS1362-027 DS1362-027...
- Page 25 DS 1362-027 LBT 8146 FILIALI STABILIMENTO 20151 MILANO - V.Gallarate 218 URMET DOMUS S.p.A. Tel. 02.380.111.75 - Fax 02.380.111.80 10154 TORINO (ITALY) 00043 CIAMPINO (ROMA) V.L. Einaudi 17/19A VIA BOLOGNA 188/C Tel. 06.791.07.30 - Fax 06.791.48.97 Telef. +39 011.24.00.000 (RIC. AUT.) 80013 CASALNUOVO (NA) V.Nazionale delle Puglie 3...
Need help?
Do you have a question about the 1362 and is the answer not in the manual?
Questions and answers