DeWalt DW116 Instruction Manual page 9

158865/JAN95 5/20/02 3:47 PM
Important
To assure product SAFETY and RELIABILITY, repairs,
maintenance, and adjustment should be performed by D
certified service centers or other qualified service organizations.
These service organizations service D
D WALT replacement parts.
E
Black & Decker (U.S) Inc. industrial tool service centers are
certified for servicing D WALT industrial tools.
E
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local service center.
A complete listing of service centers is included on the owner's
registration card packed with your tool.
If you need assistance in locating any accessory, please contact
DeWalt Industrial Tool Company, P.O. Box 158, 626 Hanover Pike,
Hampstead, MD 21074 or call 1-800-4-DeWALT (1-800-433-9258).
Recommended accessories for your Drill are shown in this manual.
(CAUTION: The use of any other accessory might be hazardous.)
For safety in use, the following accessories should be used only in
sizes up to the maximums shown in the table below.
Page 6
WALT
E
WALT tools always using
E
6
Maximum Recommended Capacities
CHUCK CAPACITY
R.P.M. DW116
R.P.M. DW117
BITS, METAL DRILLING
WOOD, FLAT BORING
BITS, MASONRY DRILLING
HOLE SAWS
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL
TO OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH
WHICH IT IS BEING USED.
WIRE WHEEL BRUSHES 4" Diameter Maximum
WIRE CUP BRUSHES 3" Diameter Maximum
BUFFING WHEELS 3" Diameter Maximum
RUBBER BACKING PADS 4-5/8" Diameter Maximum
1/2"
0-600
0-900
1/2"
1-3/4"
9/16"
3"