Configuring Data Objects For Snmp Device; General About Configuring Data Objects For Snmp Device; Device Name Plate (Dpl) - ABB COM600 series User Manual

3.4.8.
3.4.8.1.
3.4.8.2.
26
COM600 series, Version 4.1
SNMP OPC Server User's Manual

Configuring data objects for SNMP Device

General about configuring data objects for SNMP Device

Object Identifiers (OIDs) are used in data object configuration. Each OID identifies a
variable that can be read or set via SNMP. The SNMP device uses a hierarchical
namespace Management Information Base (MIB) to contain OIDs. You can find all
available OIDs from the MIB file published by the device. The MIB files have the
extension .mib and are generally distributed with the device.
SNMP OPC Server supports the following data object types that provide status informa-
tion:
• 3.4.8.2, Device name plate (DPL)
•
3.4.8.3, Controllable integer status (INC)
•
3.4.8.4, Integer status (INS)
•
3.4.8.5, Logical Node name plate (LPL)
•
3.4.8.6, Measured value (MV)
• 3.4.8.7, Controllable Single point (SPC)
• 3.4.8.8, Single point status (SPS)
• 3.4.8.9, Binary counter reading (BCR)
The parameters are stored in Object Properties in SAB600, see the tables for each data
object type. The actual configuration by using SAB600 is performed as described in
3.4.1, General about configuring objects.

Device name plate (DPL)

Table 3.4.8.2-1 Configurable DPL properties for SNMP OPC Server, subtype Basic
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data DPL
Class
Sub Type Basic
Vendor
Vendor ABB
Hardware Revision
Hardware Revision 1.0
Software Revision
Software Revision 1.0
Description
Common data class according to IEC
61850
Object subtype.
Text string describing the vendor.
Text string describing the hardware revi-
sion.
Text string describing the software revi-
sion.
1MRS757276