LG S5000 Service Manual page 19

3. TECHNICAL BRIEF
B. OPLL
The OPLL consists of a feedback mixer, a phase detector, a loop filter, and a fully integrated TXVCO.
The TXVCO is centered between the DCS 1800 and PCS 1900 bands, and its output is divided by 2
for the GSM 850 and E-GSM 900 bands. The RFLO frequency is generated between 1272 and 1483
MHz. To allow a single VCO to be used for the RFLO, high-side injection is used for the GSM 850 and
E-GSM 900 bands, and low-side injection is used for the DCS 1800 and PCS 1900 bands. The I and Q
signals are automatically swapped when switching bands. Additionally, the SWAP bit in register 03h
can be used to manually exchange the I and Q signals.
Low-pass filters before the OPLL phase detector reduce the harmonic content of the quadrature
modulator and feedback mixer outputs. The cutoff frequency of the filters is programmable with the
FIF[3:0] bits in register 04h (Figure 3-3), and should be set to the recommended settings detailed in
the register description.
- 20 -