Vivitar vivcam T5050 User Manual page 50

Table of Contents

Advertisement

The Slide Show menu options include:
Setting Option
Start
Seconds
Music
Transition
Repeat
DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the memory card
for printing and specify the number of print copies in advance using the camera. This is extremely
convenient for sending the images to a photo developing service or for printing on a direct print
function compatible printer.
To set up DPOF:
1)
Press the
Playback button to enter Playback Mode.
2)
Press the Right/Left button to select a file.
Press the Menu button and then press the Up/Down button to select 'DPOF'.
3)
Press the OK button and then press the Up/Down button to select 'Single/All/Reset'.
4)
5)
Press the OK button to confirm.
Description
Select 'Start' to begin the Slide Show.
Press the OK button to Pause.
Press the Menu button to stop the Slide Show.
Press Left/Right button to set the interval between 1/3/5 seconds
Press Left/Right button to set the music that will play during the Slide
Show.
Applies a transition effect from left to right.
Applies a transition effect from upper-left side to lower-right side.
Applies a horizontal transition effect.
Applies a vertical transition effect.
Applies a horizontal transition effect by intersecting an image.
Mix Applies a random sequence of the available effects.
Press Left/Right button to select 'Yes' to repeat the Slide Show, or 'No'
to play the Slide Show only once.
49

Advertisement

Table of Contents
loading

Table of Contents