OPERATING THE T-1500 Mini The T-1500 Mini is an Electric Product - not a Toy. To avoid the risk of fire, burns, personal injury, and electric shock, it should not be played with and should be placed out of the reach of small children.
T-1500 Mini Snow Machine Features and Specifications Features The best Evaporative Snow Machine in the world. 4-channel DMX control Remote control (rented/sold separately) Variable stand alone features Lifetime warranty 24-Hour Technical Service Repeat Cycle Timer (5 min. and 15 min. cycles)
Page 4
SnowMasters™ approved solution. The FG-100 Snow Solution comes premixed and ready to use. You will have to pour the solution into the plastic bottle that comes with the T-1500 Mini, if the solution bottle does not fit into the well on the T-1500 Mini.
The pump in the T-1500 Mini is self-priming. 4) In order to start the T-1500 Mini, plug the Snow Machine power cord into an outlet with a 3 lead grounded conductor (preferably a Ground Fault Circuit Interrupt -GFCI). Next, turn the power...
Page 6
Operating Instructions: switch “ON” in the back of the T-1500 Mini. If you are using the DMX features, read the section on DMX settings to get the proper response. If you are using the remote, set the DMX display on the back of the T-1500 Mini unit to any number between 900-999.
Using the Controller Snow Machine Controller The snow machine controller consists of one fan relay, a pump controller and control interface capable of receiving a DMX signal or a proprietary remote control signal. The DMX address is set via a three digit rotary switch located on the back of the device.
Page 8
Using the Controller Snow Machine Controller Table 2 – 5 Minute Cycle ON Time WAIT Time Table 2 displays the settings 15 Seconds 4 Minutes 45 Seconds for the 5 minute cycle. 30 Seconds 4 Minutes 30 Seconds Within this mode, the device cycles are dependent on 1 Minute 4 Minutes...
Page 9
Using the Controller and the Remote Snow Machine Controller Table 5 shows the use of switches B and C when switch A is set to 8 (Always On state). Switches B and C work similarly to Switch C when in the 5 minute and 15 minute cycle modes. It controls the flake size.
Cleaning and Storing the T-1500 Mini In order to clean the T-1500 Mini, fill another plastic container half full with water and run the unit for 3-5 minutes with the nozzle tilted downward into another container (if possible). You may clean the plastic exterior of the T-1500 Mini with detergent and water.
Page 11
Is the Snow generated very wet or light in volume? Always allow two minutes or so for the T-1500 Mini to come to full operation after an extended storage or for the first time operating.
Page 12
What is Evaporative Snow ™ Incorporating Evaporative Snow In Your Production Design ™ SnowMasters is a pioneer of the “evaporative snow” proccess. In order to help you incorporate “evaporative snow” in your production design, we are providing you the following explanation as to exactly what it is and how a snow machine works.
This will reduce the width and depth of snow output. Distance of Throw and Coverage of Snowfall for The T-1500 Mini OVERHEAD VIEW T-1500 Mini Diagram 1...
Limited Lifetime Warranty SnowMasters™ provides a limited lifetime warranty for the T-1500 Mini from any manufacturing defects. Any misuse, abuse, or negligence automatically voids our warranty. Running any other liquids/materials other than the SnowMasters™’ solutions through the pump automatically voids our warranty. SnowMasters™...
Need help?
Do you have a question about the T-1500 Mini and is the answer not in the manual?
Questions and answers