1. Manuals
  2. Brands
  3. CAB Manuals
  4. Accessories
  5. ps800
  6. Operator's manual

CAB ps800 Operator's Manual

Present sensor
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Operator's Manual
Present Sensor
PS800 / PS900 / PS1000
Made in Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ps800 and is the answer not in the manual?

Questions and answers

Related Manuals for CAB ps800

Summary of Contents for CAB ps800

  • Page 1 Operator's Manual Present Sensor PS800 / PS900 / PS1000 Made in Germany...
  • Page 2 GmbH & Co. KG. The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original intended purpose - in particular the procurement of spare parts for products sold by cab – demand the previous written authorization by cab.

  • Page 3: Intended Use

    Time 1.2 Intended Use • The devices are options only for cab SQUIX label printer to dispense of material which approved by the manufacturer. Any other use or use going beyond this shall be regarded as improper use. The manufacturer/supplier shall not be liable for damage resulting from unauthorized use;...

  • Page 4: Product Description

    That way the front edge of the next label will be fed back ahead of the printing line. The cycle will be repeated till the end of the print job. PS800 • Detection of labels in peel-off position by a see-through sensor with fixed sender.
  • Page 5 Mounting Note! Keep the original packaging for later transports. Attention! Damage and failure in function by dust, dirtiness and humidity.  Use devices only in a clean and dry environment. Figure 1 Mounting the present sensor  Switch off the printer. ...
  • Page 6 Operation 4.1 Preparation  Insert labels or peel-off mode  Operator's manual of the printer.  Insert ribbon  Operator's manual of the printer.  Activate the peel-off mode in the software. In direct programming use the "P" command.  Programming Manual of the printer. ...

  • Page 7: Printer Configuration

    Printer Configuration Peel-off Parameter  Start menu.  Select Setup > Peeling-off. Parameter Meaning Default Peel-off position 0.0 mm Shift the position of the dispensed label relative to the dispensing edge. The setting can also be adjusted by the software. The settings of configuration and software are added together.

  • Page 8: Reference To The Eu Declaration Of Conformity

    Licenses 6.1 Reference to the EU Declaration of Conformity The Present Sensors PS800 / PS900 / PS1000 comply with the relevant fundamental regulations of the EU Rules for Safety and Health: • Directive 2014/30/EU relating to electromagnetic compatibility • Directive 2011/65/EU on the restriction of the use of certain hazardous...

This manual is also suitable for:

Ps1000Ps900

Table of Contents