Connection And Setup; Connecting The Power Cord; Connecting Antenna And Other Devices - Changhong Electric LED50C2000A Operation Manual

Connection and Setup

Connecting the Power Cord

1.Connect the power cord with 240V power supply.
2.Turn on the power switch of the TV.
NOTE: • The power input for the TV is 240V~ 50/60Hz.
• Be sure the power cord is disconnected and the TV is switched on before making
connections.
• To be completely disconnected from the supply mains, the mains plug of the television
should be disconnected from the mains socket outlet completely.

Connecting Antenna and Other Devices

The equipment with
The equipment with
HDMI output function
HDMI output function
• When using digital audio optical output socket, please note the plug direction which
should be in accordance with the socket. Otherwise the socket would be easily
damaged for the improper operation.
• Make sure that all the components are connected correctly.
• For receiving free to air TV broadcasts, we recommend that you use an external fixed
antenna. Should you require the use of a temporary antenna, please ensure that you
purchase an antenna with sufficient ability to receive in weak signal areas. Only when
you are in close proximity to a transmitter will a temporary antenna reproduce a signal
as strongly as a fixed antenna. A digital antenna on the roof is recommended.
• Component and AV can not be used at same time for they share of one audio channel.
The equipment with
Component output function
The equipment with
HDMI output function
Audio R
Audio L
Computer
10
SPDIF
USB Drive
The equipment with AV output
function (such as VCR, DVD,
set-top boxes, etc.).
RF Coaxial
Wire(75 ohm)