Troubleshooting - Audiovox FPE1506DV Operating Instructions Manual

Troubleshooting

SYMPTOM
The player cannot play.
There is no sound.
LCD is no display
Cannot continue to play and
play a section repeatedly.
There is no picture or picture
move up and down.
The remote control does not
work.
Other Notes:
Static or other external interfere may cause the player to behave abnormally. In this occurs, unplug
the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist,
then please disconnect the power and consult a qualified technician.
Make sure disc is loaded in.
Make sure disc is loaded upside down.
Make sure disc is not dirty or warped.
Make sure the player's region code is the same as region code
of DVD disc.
Make sure water condensation has not occurred. If it occurs,
take out disc and leave the player on for at least one hour.
Make sure system connection is correct.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
Make sure the speakers are not muted.
In the TV mode, set the correct sound mode.
Make sure the unit is turned on and the connections are
correct.
Make sure the power adapter is correctly connected.
Make sure is not in A-B or other repeat status.
Make sure disc is not dirty or damaged.
Check if the connections with the external AV signal source are
correct.
Correctly set the items in the picture menu.
Check if the video type input signal is not corresponding to the
unit.
Make sure the unit is turned on and in correct video type.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
- 43 -
CHECK ITEM