Cradlepoint COR IBR350 Manual page 84

4g lte gateway
Hide thumbs Also See for COR IBR350:
Table of Contents

Advertisement

Examples:
1234,apn,myapn@apn.com,
1234,apn,myapn@apn.com,usb1,
userpass – Set the modem's authentication username and password
Syntax:
<password>,userpass,<username>,<userpassword>,[port,]
Examples:
1234,userpass,joe,mypassword,
1234,userpass,joe,mypassword,usb3,
simpin – Set the SIM's PIN
(port parameter optional)
Syntax:
<password>,simpin,<pin>,[port,]
Examples:
1234,simpin,5678,
//set simpin in highest priority modem
1234,simpin,5678,usb2
//set simpin in modem on port usb2
log – Return a portion of the router log
Syntax:
<password>,log,[start,]
Examples:
1234,log,
//return the first 10 items of the log (items 0 through 9)
1234,log,10,
//return items 10 through 19 of the log
1234,log,20,
//return items 20 through 29 of the log
Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text messages on the modem's
account, and use this command only if necessary.
*
The "port" parameter is optional. It specifies which port – and therefore which modem – to perform the action on. If not given, the action will happen on
the highest priority modem.
Sample Debug Session
The following is an example of a debug session to discover a modem's APN is misconfigured and needs to be set.
Figure out the state of the modems on the router:
1234,rstatus,
Receive the modem's status and settings:
1234,mstatus,
Set the modem's APN to the correct setting:
1234,apn,broadband,
Verify the APN was set properly:
1234,mstatus,
Continue to verify the status periodically to ensure that the modem connects:
1234,rstatus,
LLDP
The
Link Layer Discovery Protocol
(LLDP) is a standard method for network devices to share information about themselves among their neighbors. The
router stores the information it receives from its neighbors, which can be viewed on the Status → LLDP page.
//set APN of highest priority modem
//set APN for modem in port usb1
(port parameter optional)
//set information of highest priority modem
//set information on modem in port usb3

Advertisement

Table of Contents
loading

Table of Contents