Cradlepoint COR IBR350 Manual page 65

Shutdown WAN on Cap: If selected, the WAN device will shut down when the assigned usage is reached. A cycle reset or a rule deletion will re-enable
the device.
Send Alert on Cap: An email alert will be generated and sent when the assigned usage is reached.
WARNING: The SMTP mail server must be configured in System Settings → Device Alerts.
Custom Alert: When checked you enable a second email to be configured for a percentage of the assigned usage.
Percent of Usage (1-1000): If selected, a custom alert will be sent when your data usage reaches this percentage of your usage cap. For example, you
could set this at 90 percent so that you know when your usage is nearing 100 percent of the cap.
Template Configuration
Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule
created.
For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000 MB of usage in a month. When
you attach a new 4G USB modem, your template will immediately create a new Data Usage Rule for the attached modem that sends the alert as
specified.
Click Add to configure a new Template rule.
Create a Template Name that you can recognize. The template will apply to one of the following WAN types:
All WAN
All Ethernet
All Modems
Select one of these types.
The rest of the rule settings options match those in the Data Usage Rules. See the section above for additional information about how to configure your
template usage rules.
Historical Data
The Historical Data graph displays if you have a Data Usage Rule enabled for an active WAN device. This graph shows the MB/sec trend for the last
day. In this section you also have the ability to change the data usage records for a connected WAN device: Add Usage or Erase History. You may
want to add data usage to a device's record if, for example, you've used the SIM or data plan with other devices – that data usage wouldn't otherwise be
recorded by the router.
Click on Add Usage and then select the date and input additional data amount in MB.