Tension Adjustment Of The Door Spring; Connection Of Drain Hoses - Belling BEL IDW45 Instruction Manual

●

Tension adjustment of the door spring

The door sp rings are se t at the facto ry to t he pro per te nsion for th e oute r door.
If aest hetic woode n pan el are instal led, you will have to adjust the door spring tensi on.
Rotate the a djusti ng scr ew to drive t he ad justor to strain or relax t he ste el cab le
(see fi gure 5 ).
Door spring t ension is correct w hen
the door remains horizontal in the
fully opened position
to a close wit h the slight lift of a
finger.
●

Connection of drain hoses

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run in to the sink, making sure to
avoid bending or crimping it. The top of the hose must be less than 1000mm.
NOTE
The top of the hose
must be less th an
1000mm.
，
yet rises
【 】
Figure5
Ten sion ad justment
of th e door sprin g
Front
Drain pipe
A
B
φ 40 mm
21
Counter