CBC LME22 Operation Instruction & User Manual page 19

Use the proper power cord with correct attachment plug type. If the
-
power source is 120 V AC, use a power cord that has UL and C-UL
approvals. If the power source is a 240 V AC supply, use the tandem (T
blade) type attachment plug with ground conductor power cord that
meets the respective European country's safety regulations, such as VDE
for Germany.
Do not overload wall outlets or power cords. Ensure that the total of all
-
units plugged into the wall outlet does not exceed 10 amperes.
Ensure that the total ampere rating of all units plugged into the extension
-
cord is not over the cord's rating.
If the power supply cord, which came with your monitor, is to be
-
connected to the PC instead of the wall outlet, this equipment is to be
used with UL/TUV approved computers with receptacle rated 100~240V
AC, 50/60Hz, 2.0A(minimum).
＊ Environment
Place the monitor on a flat and leveled surface.
-
Place the monitor in a well-ventilated place.
-
Keep the monitor away from:
-
Extremely hot, cold or humid places, places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic fields.
17 1DUVGL1B_A2