User Manual Content; Commands - Honeywell PPT User Manual

0 USERS MANUAL CONTENT
This user's manual is divided into the following sections.
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Section 7
Section 8
Section 9
It is suggested that the first-time user read the "Getting Started" section to be sure the necessary
items are on hand. PPTs are available in various pressure ranges for absolute, gauge and differential
modes of operation. Be sure to connect a source of pressure that matches the transducer range and mode.
Introduction—Product overview and hardware description.
Getting Started—Lists equipment and procedures necessary to operate the PPT
and provides a few simple command examples, which will get first-time users
acquainted with the command structure.
Commands: Quick Reference—A brief description of each command with
typical PPT input and response examples.
Functional Operation
Commands—Contains a detailed description of the command structure, func-
tional groupings and all user commands.
Electrical Connections—Contains wiring diagrams for various PPT electrical
connections.
Timing Diagrams—Illustrates RS-232 serial port timing for command and
reply interaction.
Specifications—Contains electrical and environmental specifications.
Dimensions—Contains a case outline of the PPT
1