Philips 5231 series User Manual page 38

To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
display correctly.
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1. Press  , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary teletext or Secondary teletext ,
and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5...
1. Press TEXT.
2. With Text/Teletext open on screen,
press  OPTIONS.
3. Select Text 2.5 > Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Clock
Date and time
Automatic
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
When you record programmes - scheduled in the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the Clock setting is hidden to avoid an
incorrect clock setting.
To correct the TV clock automatically...
1. Press  , select General settings > Clock > Auto
clock mode, and select Country dependent.
2. Select Daylight saving and select the appropriate
setting.
3. Press  (left) repeatedly if necessary, to close the
menu.
Manual
To set the TV clock manually...
1. Press  , select General
settings > Clock > Auto clock mode, and
select Manual.
2. Select Date and Time to adjust.
3. Press  (left) repeatedly if necessary, to close the
menu.
Time zone
To set the time zone...
1. Press  , select General
settings > Clock > Time zone, and press OK.
2. Select one of the time zones.
3. Press  (left) repeatedly if necessary, to close the
menu.
Sleep timer
With the Sleep timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep timer...
1. Press  , select General settings > Sleep
timer and press OK.
2. With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
38