Switching On And Off; On Or Standby; Sleep Timer; Switch Off Timer - Philips 5231 series User Manual

4
Switching On and
Off
4.1

On or standby

5231 series TV
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
Switch On
If the indicator light is off, press the power button on
the top of the bluetooth sound station to switch on
the TV - the red indicator will goes off.
When the TV in standby, press
control to switch the TV on.
Switch to standby
To switch the TV to standby, press
control.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
4.2

Sleep timer

With the Sleep timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep timer...
1. Press  , select General settings > Sleep
timer and press OK.
2. With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press  (left) repeatedly if necessary, to close the
menu.

on the remote

on the remote
4.3

Switch off timer

If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1. Press  , select Eco settings and press 
to enter the menu.
2. Select Switch off timer and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press  (left) repeatedly if necessary, to close the
menu.
For more information on environmentally friendly TV
settings, see chapter Settings > Eco settings.
15
(right)