TBK vision MY-4101KT User Manual page 6

Users Manual
Intelligent Keyboard Controller
【Addr】
【Clear】
【0-9】
【Enter】
【Focus+/A】
【Focus-/PREV】
【ZOOM+/AUX】
【ZOOM-/M/A】
【IRIS+/EDIT】
【IRIS- /PTZ】
【WIPER/MENU】
【LIGHT/SHUT DOWN】 open light and close Relay;
introduction
Select the address of decoder, high speed dome and DVR.
PTZ address code is among 0-254 and DVR address code
is among 1-14.
Clean current input content.
Number button:0,1,2,3,4,5,6,7,8,9.
Confirm current input content
In PTZ control mode: set the lens focus near;
In DVR control mode: switch typewriting.
In PTZ control mode: set the lens focus far;
In DVR control mode: preview single, four, nine, sixteen
frame switch key.
In PTZ control mode: zoom out the lens;
In DVR control mode: undefinition.
In PTZ control mode: zoom in the lens;
In DVR control mode: switch Main port/Optional port
output.( Hold for 2 seconds)
In PTZ control mode: open the lens iris;
In DVR control mode: edit inputs.
In PTZ control mode: close the lens iris;
In DVR control mode: control tripod head.
In PTZ control mode: open windshield wiper Relay;
In DVR control mode: select DVR setting menu.
In DVR control mode: control DVR Shutdown.
INTRODUCTION
4