Bang & Olufsen BeoSystem 4 Manual page 4

Cautions
– To prevent injury, use Bang & Olufsen approved
stands and wall brackets only!
– Place your product on a firm, stable surface.
– Do not place any items on top of your product.
– Do not subject the product to rain, high humidity
or sources of heat.
– The product is intended for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–40°C (50–105°F), and
at an altitude of no more than 1,500 m (5,000 ft).
– If the product has been exposed to
temperatures below 5°C (40°F), leave it at room
temperature and wait until the product has
regained normal room temperature before it is
connected to the mains and switched on.
– Do not place the product in direct sunlight or
direct artificial light, such as a spotlight, as this
may reduce the sensitivity of the remote control
receiver.
– WARNING: Do not expose this equip ment to
dripping or splashing and ensure that no objects
filled with liquids, such as vases, are placed on
the equipment.
– Leave enough space around the product for
adequate ventilation.
– Connect all cables before connecting or
reconnecting any of the products in your system
to the mains.
– No naked flame sources, such as lighted candles
should be placed on the apparatus.
– To prevent the spread of fire, keep candles or
other open flames away from this product at all
times.
– Do not attempt to open the product. Leave
such operations to qualified service personnel.
– The product can only be switched off
completely by disconnecting it from the mains
socket. The mains socket must always be
accessible.
– Follow instructions to ensure correct and safe
installation and interconnection of equipment in
multimedia systems.