Samsung WW9*K5 SERIES User Manual page 53

Code
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
Ub
• Redistribute the load. If only one item of clothing needs washing, such as
a bathrobe or pair of jeans, the final spin result might be unsatisfactory,
and an "Ub" check message will be shown in the display.
Check the motor for operation.
3C
• Try restarting the cycle.
• If the information code remains, contact a customer service centre.
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service centre.
UC
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service centre.
High temperature heating check.
HC
• If the information code remains, contact a customer service centre.
The Water Level sensor is not working properly.
1C
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service centre.
Check communications between main and sub PBAs.
AC
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service centre.
This message appears when you open the Add Door without pressing
Start/Pause. If this happens, do one of the following:
• Press the Add Door to close properly. Then, press
DDC, ddC
again.
• To add laundry, open the Add Door and input laundry. Close the Add Door
properly. Then, press
The MEMS sensor is not working properly.
8C
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a local Samsung service centre.
Untitled-4 53
Action
Start/Pause to resume operation.
Start/Pause and try
English 53
2016-02-17 6:57:44