2
Remove the mounting sleeve with the
supplied disassembly tools.
3
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
•
Skip this step if the unit is not fi xed by
sleeve but supplied screws.
ENG
14
4
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
•
If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
5
Connect the supplied mounting bolt to the
unit.
6
Place the supplied rubber cushion over the
end of the mounting bolt.