Philips CAR ENTERTAINMENT SYSTEM CE120 User Manual page 11

Connect wires: ISO connectors
Caution
•
Ensure that all loose leads are insulated with electrical
tape.
1
Pull out the ISO connectors from car
dashboard and connect them to the bigger
end of the supplied standard connector.
2
Connect the other end of the supplied
standard connector to the unit.
3
Connect the antenna and amplifi er as
illustrated, if applicable.
3 3 2 2
Connector
1 Antenna
2 Rear line out
(right)
3 Rear line out
(left)
Connect wires: without ISO
connectors
Caution
•
Ensure that all loose leads are insulated with electrical
tape.
1
Cut off the bigger end of the supplied
standard connector.
1 1
Connect to
Antenna
Amplifi er line in
(right)
Amplifi er line in
(left)
ENG
11