Table of Contents
Advertisement
Technische Beschreibung unf Bedienungsanleitung
Connection
The LT2 in the 5.1 configuration with an active
subwoofer can be connected to any normal Dol-
by Digital/DTS 5.1/6.1/7.1 AV receiver. For a 7.1 AV
receiver you do not use the rear centre socket(s).
If you already have a modern 7.1 AV receiver you
can expand your theatre LT 2 with two additional
L 220 FCR satellites to make a 7.1 home cinema
set.
Connect the front, centre and rear speakers to a
5.1 AV receiver as per the diagram in Fig. 1.
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS-AV receiver via a mono-cinch
cable with the right Line Input of the subwoofer
as per the drawing in Fig. 2.
The left input (Line Input L) remains unoccupied. A
Y-adapter is required to use both of the subwoo-
fer inputs (refer to Accessories, Page 7).
L 220 FR
Front speaker
left
Subwoofer cinch input
L 220 FCR
Rear speaker
left
Front, centre and rear speakers
AV receiver
Speaker output
Fig. 1
Subwoofer
Sub Out
AV receiver
Fig.2
L 220 FCR
Centre speaker
L 2200 SW
Active
subwoofer
Teufel
Connection field
Cinch output
Cinch input
Input R
Subwoofer
L 220 FR
Front speaker
right
L 220 FCR
Rear speaker
right
Connecting the speakers to an
AV surround receiver using
a 5.1 set as an example.
A 6.1/7.1 receiver has one or
two rear centre socket pair(s).
Information:
The five passive speakers in the
set – no matter whether they
are the satellite FCRs or column
FRs – are equipped with the
same speaker chassis and are
technically identical; the column
speakers simply have an inte-
grated base that can be ignored
acoustically.
The speakers can be used in the
front, centre or rear depending
on the room requirements. We do
however recommend that they
are used in pairs – for example
both column speakers TOGETHER
either for front OR rear sound.
· LT 2
11
Advertisement
Table of Contents
