Setting Up The 7.1 Configuration - Teufel LT 2 Technical Specifications And Operating Instructions

Setting up the 7.1 configuration

Technische Beschreibung unf Bedienungsanleitung
We recommend placing the
subwoofer in the front grey
area.
We recommend placing the
rear speakers in the rear grey
area.
10 · LT 2
If you add an additional pair of L 220 FCR speakers
to your 5.1 complete set (refer to Page 7 of these
instructions) you can also use the complete per-
formance range of a 7.1 AV receiver and therefore
use the LT 2 as a 7.1 home cinema system.
Front · Centre · Subwoofer · Rear (side)
The speakers are set up in the same way as for the
5.1 set. Please read the description in "Setting up
the 5.1 configuration" on Pages 8 and 9 of these
instructions.
Rear Centre
The ideal placement of a 7.1 system assumes that
the rear effect speaker (rear side) is fixed to the
Front
Rear
sidewall next to the listening location and the
rear centre speakers are on the back wall; always
at a height of 0.40–2.10 metres. The same height
as the rear side speakers would be perfect. If you
use the FCR satellites as the rear centre, you can
fix these to the wall horizontally or vertically.
If you visualise the set up graphically and link
the four rear speakers with lines you will ideal-
ly get a trapezoid with equal length arms. Each
arm should be longer than 1.00 metre. As soon as
the arms have different lengths or the four rear
speakers are set at different heights, you can ba-
lance this asymmetry by entering the distances
of the individual speakers in the AV receiver's
speaker setup.
SW Centre
Rear Centre
Front
Rear