Nikkei Extreme X2 User Manual page 18

__
Film mode
FILM
LOOP RECORDING
MOTION DETECTION
EXPOSURE
DATE & TIME
Resolution: you can set here the resolution. You can choose from: 720P
1280x720, WVGA 840x480 and VGA 640 x 480.
Loop recording is the process of recording video feeds. This process is
a never-ending one: at the end of the internal disk drive, the recording
process continues to record at the beginning, erasing the previously
recorded material and replacing it with the new content. Within this
function you can set the duration of 1 video. You can choose the following
settings: OFF, 1min, 2min, 3min, 5min 10min.
Exposure: you can set the exposure here. You can choose from: -2.0, -5/3,
-4/3, -1.0, -2/3, -1/3, 0.0, +1/3, +2/3, +1.0, +4/3, +5/3, +2.0
Motion sensor/detection: (On/Off) If the camera is on, this function
allows for video recording as soon as the camera detects movement; the
recording time is 10 seconds.
Recording audio: you can set here the recording sound on and off.
Date stamp (on photo): on/off, time and date.
G-sensor: With the G-sensor on, sensitivity: low/medium/high, the
recording is automatically saved to the EVENT folder on the SD card in
the event of severe jolts (e.g. a vehicle collision). Recordings saved to the
EVENT folder are not removed with the delete option; these recordings
can only be removed by formatting the SD card.
__
00:00:00
720P
5
F
+
0
2016/01/05 00:00:00
MICROPHONE
RECORDING TIME
RESOLUTION
MEMORY CARD
BATTERY
18