Advertisement
Quick Links
Advertisement
Related Manuals for Panasonic FV-07VBA1
Summary of Contents for Panasonic FV-07VBA1
- Page 1 INSTALLATION FOR FV-07VBA1 (WALL MOUNTING)
- Page 3 The motor/grille assembly FV-07VBB1 must be installed with housing can FV-07VBA1 that is marked on the carton to indicate the suitability with this model. Other motor/grille assembly can not be substituted.
- Page 4 (ST4.2X20)
- Page 5 Fuse in motor) Green Earth ground Thermally - protected INSTALLATION FOR FV-07VBA1(JOIST MOUNTING) 1. Affix the fan housing to joist with 3 long Fan housing screws (ST4.2X20) by affixing first 1 screw on the bottom of the joist, hang up the fan...
- Page 6 INSTALLATION FOR FV-07VBA1 CONTINUED 9. Select the air volume speed by adjusting the switch. Factory setting is "I" (Standard) position; pressing "II" (Boost) s elects high airflow position. (Fig.4 of page 5 ) Housing can Ceiling 10. Finish ceiling work. Ceiling hole should be aligned with the inside edge of the flange.
- Page 7 INSTALLATION FOR FV-07VBB1 1. Insert the blower / motor assembly by sliding it into adaptor flanges. Then press lock the blower / motor Adaptor assembly into the housing can until the blower flanges “clicks” into place for temporary fixation. (Fig.8) 2.
- Page 8 Insulation around the ducts can reduce energy loss and inhibit mold growth. Fans installed with existing ducts may not achieve their rated air flow. Panasonic Corporation 2016 Printed in Mexico P0816-0 07VBA1M420...