Table of Contents
Advertisement
Example below is in NTSC mode.
The values are different for DTV mode:
7. Using the CUSTOMER'S REMOTE, use the channel UP
or DOWN keys to scroll through the menu and the
VOLUME UP or DOWN keys to make the adjustments.
8. To exit the service menu, press the (ENTER) key one
time.
DTV ADJUSTMENTS
9. Press the Channel Up key one time, the following
menu will appear.
HEAT RUN
AUTO CUTOFF
R-CUT
G-CUT
B-CUT
R-GAIN
G-GAIN
B-GAIN
NOTE: "Heat run" has the following settings: OFF, WHITE,
RED, BLUE, and GREEN.
SERVICING
10. These are for warm up of the unit as well as testing
The following chart shows starting value settings for
OFF
22
8
23
14
12
13
11. Using the CUSTOMER'S REMOTE, use the Channel UP
12. To exit this portion of the service menu cycle power
15
for defects. This function will also remove minor burn-
in on the display. DO NOT USE FOR SETTING RGB
DRIVES.
adjustments.
DTV Adjustments
VP 0 HEATRUN
VP 1 CUTOFF-AUTO
VP 2 R-FINE
VP 3 G-FINE
VP 4 B-FINE
VP 5 R-GAIN
VP 6 G-GAIN
VP 7 B-GAIN
VP 8 R-CUT
VP 9 G-CUT
VP 10 B-CUT
VP 11 (NTSC) DVCO ADJ
VP 11 (DTV) AUTO PLL
VP 12
or DOWN keys to scroll through the menu and the
VOLUME UP or DOWN keys to make the adjustments.
off and on.
NTSC
DTV
OFF
OFF
16
16
16
16
16
16
16
16
10
10
3
3
151
161
94
95
25
26
OFOO
END
PDP 60" - SERVICING
Advertisement
Table of Contents
