Page 1
Operating Instructions for Porsche Junior Seat ISOFIX...
Page 2
Deviations from the described product contents Version: April 2009 any type is only permissible with the written are possible in various countries due to country- Printed in Germany authorisation of Dr. Ing. h.c. F. Porsche AG. specific regulations and statutory requirements.
Page 3
Dear Customer, We thank you for the trust you have shown in buying this product and congratulate you on your new Porsche Junior Seat ISOFIX. The Porsche Junior Seat ISOFIX was developed in collaboration with BRITAX Römer Kindersicherheit GmbH and has been tested and released for your Porsche.
Safety Notes Care Instructions Safety Notes for Airbags ......37 Cleaning ............ 54 General Safety Notes ........37 Removing and Fitting the Covers ....54 Notes ............38 Removing the Headrest Cover ..... 54 Removing the Seat Cushion Cover ....55 Fitting the Covers ........57 Operation Removing the Belts ........
Safety Notes for Airbags General Safety Notes Warning Loss of safety function. Danger Danger f Regularly inspect all important parts for signs Passenger airbags can cause severe or Danger of severe or mortal injuries if there of damage. Make sure that the mechanical mortal injuries to children when they are are unsecured persons or objects in the components function properly.
Notes Danger Danger of severe or mortal injuries if the Notes child seat is not installed properly. f Please observe the corresponding safety f Never fasten the child seat with a two-point notes on using a child seat in the vehicle. seat belt.
Use in the Vehicle B) with three-point seat belt of the vehicle and support leg (semi-universal) The Porsche Junior Seat ISOFIX is approved for Fastening with three-point seat belt and support two different types of installation: leg is subject to a semi-universal approval. The...
Installing Child Seat with ISOFIX 2. Grasp the green handle and pull the locking 3. Unfold the support leg (40). arms out to the lock. Fastening System 4. Hold the child seat with both hands. 1. Clip the two insertion aids with the opening facing up onto the two ISOFIX fastening points (2).
Page 9
Caution! Danger of severe or mortal injuries if the locking arms are not engaged properly. f The green markings must be visible on the locking buttons on both sides. f Before every journey, check whether the locking arms are engaged properly. 5.
Page 10
7. Pull on the Porsche Junior Seat ISOFIX 8. Press the orange tensioning button 9. Turn the knob (39) counter-clockwise and pull child seat to check whether it is engaged push the Porsche Junior Seat ISOFIX child seat the support leg...
Removing Child Seat with ISOFIX 2. Press the grey locking buttons on the left 3. Press the orange tensioning button and right sides of the seat lower section (12). simultaneously push the locking arms back Fastening System The locking arms disengage.
1. Unfold the support leg (40). In the interests of your child’s safety, ensure that 2. Place the Porsche Junior Seat ISOFIX child seat on the vehicle seat in the direction – the locking arms of the Porsche Junior of travel.
Page 13
4. Pull the three-point seat belt out and guide it 6. Place the lap belt (14) into the light red belt 7. Tighten the lap belt (14) by pulling on the through between the seat shell (11) and the guides (15) on both sides of the seat lower diagonal belt (16).
Page 14
8. Swivel down the clamping lever (17) of the 10.Place the diagonal belt (16) into the dark red 11.Use your knee to press the Porsche Junior dark red belt clamp (18) on the side of the belt guide (40) on the other side.
Removing Child Seat with 13.Turn the knob (39) counter-clockwise and pull 14.Push the adjusting handle (10) up and push the support leg (40) out until it rests securely the seat shell (11) back again. Three-Point Seat Belt on the vehicle floor. Then turn the knob in the 15.Pull on the child seat to ensure that it is opposite direction to lock.
3. Now open the belt clamp (18) on the side buckle (13). ensure that of the vehicle buckle. – the Porsche Junior Seat ISOFIX is securely 4. Take the three-point seat belt (16) out of the installed in the vehicle. belt guides.
Page 17
(15) of the Porsche Junior Seat ISOFIX seat surface. child seat. Operation...
4. Tilt the headrest (20) back to the seat section “Buckling in your Child”, step 1). ideal support for your child in the Porsche shell (11) again to re-lock the headrest Junior Seat ISOFIX child seat. 2. Tilt the headrest (20) forward.
Danger! holders (26). same time. Danger of injury if the shoulder belts are 4. Put your child into the Porsche Junior Seat twisted or interchanged. ISOFIX child seat. Caution! f Do not twist or interchange the shoulder belts.
In the interests of your child’s safety, ensure that... Warning! – the belts of the Porsche Junior Seat ISOFIX child seat are snug without constricting The lap belts can severely injure your child if your child. they are positioned too high.
Idle Position of the Child Seat 1. Push the adjusting handle (10) up and pull the seat shell forward to the desired position. Note The seat shell (11) must engage securely in every position. Pull on the seat shell to ensure that it is engaged.
Cleaning Removing and Fitting the Covers The cover for the Porsche Junior Seat ISOFIX Caution! consists of two parts. The Porsche Junior Seat Risk of damage due to improper cleaning. ISOFIX must be taken out of the vehicle in order f Please observe the instructions on the cover’s...
Removing the Seat Cushion Cover 4. Open the Velcro fastener on the groin pad (29) 5. Open the snap fasteners (27) on the left and and remove it. right sides of the back part of the cover. 1. Move the headrest (20) to the middle position (refer to section “Adjusting the Headrest”).
Page 24
6. Fold the back part of the seat cushion 9. Pull the cover over the trim (35) of the belt 10.Thread the buckle (24) and the belt end (36) cover onto the seat surface. adjuster from below. out of the seat cushion cover. 7.
Fitting the Covers Removing the Belts 3. Disengage the shoulder belts (19) from the connecting piece (33). 1. Fit the covers in the reverse order. 1. Remove the seat cover. 2. Tilt the headrest forward and push the Note belt loops of the shoulder pads (23) off the Make sure that the belts are not twisted and are...
Page 26
4. Pull the shoulder belts (19) and the belt 6. Pull out the Triglide (37) with which the belt is Caution! loops of the shoulder pads (23) out of the fastened at the bottom of the seat shell (11). belt slots (34). Danger of injury when removing the connecting piece (33)
Installing the Belts 7. Push the belt loop back on the short side of the 3. Engage the Triglide (37) in the long belt loop Triglide (37) and disengage the Triglide. (engage the long side of the Triglide first, then the short side).
Page 28
6. Thread the shoulder pads (23) onto the 7. Thread the shoulder belts into the belt slots. 9. Engage the shoulder belts (19) into the shoulder belts (19). connecting piece (33) again. 8. Push the shoulder belts (19) through between the deflection rod (39) and the bridge...
Buckle Care Proper functioning of the buckle makes an important contribution to safety. Malfunctions of the buckle are mostly due to contamination. Malfunction: – The belt tongues are ejected slowly when the red button is pressed. – The belt tongues no longer lock into place (they are ejected again).
Page 30
Remedy: 2. Wash out the buckle. f Soak the buckle (24) in warm water with This is how to wash out the buckle to make it detergent for at least one hour. Then rinse the function properly again. buckle out and allow it to dry thoroughly. 1.
Page 31
3. Install the buckle. f Push the Triglide (30) in upright position through the belt slot (31) in the cover from top to bottom and through the seat shell. Firmly pull on the buckle (24) to check its attachment. f Pull the seat cushion cover over the lower seat shell.
Notes on Disposal Please observe the disposal regulations valid for your country Disposal of the packaging Collection container for cardboard Disposal of individual parts Cover Residual waste, incineration Plastic parts Disposal in the appropriate containers according to the identification Metal parts Collection container for metals Belt strap Collection container for...
Need help?
Do you have a question about the 95504480288 and is the answer not in the manual?
Questions and answers