Getting Started - Asus SPATHA L701 Quick Start Manual

Getting started

To set up your ROG Spatha Gaming Mouse as a wired mouse:
1. Connect the micro USB cable to your ROG Spatha Gaming Mouse.
2. Connect the USB cable to your computer's USB port.
To set up your ROG Spatha Gaming Mouse as a wireless mouse:
1. Connect the micro USB cable to your wireless receiver/charging dock.
2. Connect the USB cable to your computer's USB port.
NOTE: Download the driver from http://www.asus.com then install it in your computer.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If you want to replace the switches, follow the steps below:
1. Remove the four (4) screws and set it aside.
2. Remove the top cover.
3. Replace the switches.
IMPORTANT!
• Ensure to install the switch into the switch socket with its button facing the front of the mouse.
• Ensure that the switches are seated properly in the switch sockets.
4. Place the top cover and secure it with the four (4) screws.
ROG Spatha Gaming Mouse
Switch socket
Mouse switches
Switch socket
7