Advertisement
2 | Cutter Installation Guide
Safety Overview
Caution:
ESD protection is required when performing these steps.
Warning:
The cover set may only be removed by a Datamax-O'Neil Authorized Service
Center. Unauthorized service will void the manufacturer's warranty.
Warning:
The printer must be powered off and disconnected from utility power prior to
performing these procedures. Failure to heed this warning may result in personal injury
or damage to internal components.
•
Maintain complete ESD protection in a safe, clean environment at all times while
servicing this equipment.
•
When handling the printhead, grasp it by its edges.
•
Avoid contact between the printhead and clothing.
•
Never pull on any wires to disconnect connectors. This can void the manufac-
turer's warranty.
Cutter Installation Guide
4
Advertisement
Need help?
Do you have a question about the Performance Series and is the answer not in the manual?