Toshiba 51HX93 Service Manual page 22

Manually adding and deleting channels in the
channel memory
After you have programmed the channels automatically, you
can manually add or delete individual channels in the channel
memory.
To add or delete channels in the channel memory:
1
Press MENU and open the SETUP menu.
2
Highlight INSTALLATION and press ENTER. (A new set
of INSTALLATION menu icons will appear on screen, as
shown in step 3).
3
Open the TERRESTRIAL menu, highlight CHANNEL ADD/
DELETE, and then press ENTER.
4
The illustration below shows channels programmed for the
ANT 1 antenna input. To view the list of channels pro-
grammed for the ANT 2 antenna input, highlight CHANGE
ANTENNA and press ENTER.
To add a channel to the channel memory:
Highlight the unchecked box next to the channel number you
want to add, and then press ENTER to check the box.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press ENTER to uncheck the box.
To save your new settings:
Highlight SAVE and press ENTER.
To revert to your original settings:
Highlight CANCEL and press ENTER before saving.
To remove all channels from the channel memory:
Highlight CLEAR ALL and press ENTER, and then highlight
SAVE and press ENTER.
Note: This action cannot be cancelled unless you highlight
CANCEL and press ENTER before saving your changes.
– 22 –