Spare Battery Charger - Audiovox DT921C User Manual

~
4. Exercise care in handling batteries
in order not to short the battery
with conducting materials such as
rings, bracelets. and keys. The
battery or conductor may overheat
and cause bums.
Place a battery pack in the Spare
Battery charger. Make sure the metal
charging contacts on the underside of
the battery pack are aligned with the
charging contacts in the Spare Battery
charger.
~
SPARE BATTERY CHARGER
'=--
=-
--
00-
The DT921 c has a bui/t-in spare
Battery Charger, which is located in the
cradle of the Base Unit.
Power Backup
When a Spare Battery pack is installed
in the Base Unit, the AUDIOVOX
DT921c uses this battery pack to
provide operational backup in case of
a power failure. If you have a fully
charged battery pack in the Spare
Battery pack charger and there is a
power outage; you will still be able to
.place and receive calls for up to five
hours.
~
~
~
Installation
Remove the Spare Battery charger
cover by pressing the release tab and
lifting up.
Replacing a Drained Handset bat-
tery
The Spare battery pack can also be
used to replace a drained Handset
battery pack to ensure uninterrupted
use. Be sure to put the drained battery
pack in the Spare Battery charger tor
recharging.
Please note that the Spare Battery
compartment charges at a slower rate
than a battery pack charging in the
Handset. It takes 24 hours to fully
charge a battery pack in the Spare
Battery charger.
11
~
rF
dt92I.p65
II 1998/6122. PM 07:14
~
~