Table of Contents
Advertisement
Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that
there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR
and take up all the damaged hard disks,then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is
damaged, the information will show "？".
4.6.2 BPS
Display the code stream（ Kb/S） and hard disk capability （ MB/H） in real time. It displays as the wave
sketch map.
4.6.3 LOG
To search log information base on the set search mode.
Log information include: system operation, configuration operation, data management, alarm affair,
recording operation, user management, file management and so on. Set the time section to look up and
click the look up button. The log information will display as a list. (one page is 128 items) Press Page up
or Page down button to look up and press delete button to clear all the log information.
Pic 4.59 BPS
68
Advertisement
Table of Contents
