Setup User-Mode - BMW S 1000 RR Rider's Manual

There are the various options for
starting lap timing.
Range of values
AUTO, EXTERN, MANUAL
Factory setting: AUTO
AUTO: Pressing the headlight
flasher button and a signal from
the lap trigger are both accep-
ted as the trigger source.
EXTERN: Only a signal from
the lap trigger is accepted as
the trigger source.
MANUAL: Only pressing the
headlight flasher button is ac-
cepted as the trigger source.
Speed limiter for pit lane
with Pro riding modes
Setting for maximum engine rpm
(±100) for riding in the pit lane
in 1st gear with the start button
pressed and held down. The en-
gine is throttled back if this set-
ting is exceeded. You have the
option of switching off the rpm
limiter for the pit lane.
Range of values
4000, 4100, 4200, ..., 8000,
OFF
Factory setting: OFF

SETUP USER-MODE

OE
ABS
ABS antilock brake system set-
USER-MODE
ting in
Range of values
SPORT, RACE, SLICK
Factory setting: SLICK
The tick appears only if the
setting was changed.
With tick: The specified value
was accepted by the ABS.
Without tick: The specified
value was not accepted.
7
127
mode.
z