Advertisement
WARNINGS
Use this product only for its intended purpose, as described in this instruction manual such as electronic bathroom scale
for domestic use only. Any other use should be considered improper and dangerous.
Packaging components (plastic bags, cardboard, polystyrene etc.) must be kept out of the reach of children as they have
the potential to be dangerous and their disposal should be carried out according to the current regulations.
NOTE: Specifications and designs are based on the latest information available at the time of printing and subject to
change without notice.
TECHNICAL SPECIFICATION
Capacity:
180kg or 396lb
Division:
100g or 0.2lb
Weight unit:
Kg / lb
Body Fat:
0.1%
Body Water:
0.1%
Memories:
10users x 5 memories
Overload indicator
Low battery indicator
Auto switch-off
Power supply:
1 CR2032 lithium battery included
Size:
30x31x2.3 cm
Weight:
1.8kg
INSTRUCTIONS
Open the battery compartment under the product.
Remove the isolating tag and close the battery compartment
How to operate
Place the scale on a stable, flat surface. Switch the scale on, by slight knock at the scale or pressing the "SET" key.
Single-weighing mode: switch the scale by a slight knock, the display will show "0.0". Now the scale is ready to be used.
Select the weight unit kg/lb.
Multi-function mode: switch the scale by pressing the "SET" key, input personal data as follows:
1. Once "P0"starts flashing, use the "
users P0-P1-P2-P3-P4-P5-P6-P7-P8-P9. Press "SET" to confirm the user selection.
2. Press the "
Confirm your gender selection by pressing the "SET" button.
3. Input your age by pressing "
input.
4. Input your height by pressing "
height input.
If "0.0" is displayed, stand on the scale barefoot, your feet and heels should be fitted into the quadrate. Wait until your
weight blinking on the display for 3 times. Keep staying on the scale. When the "0000" symbols are displayed and begin
to disappear gradually, the percentage of fat and water in body tissues is being measured. After measurements the
following data will be displayed: - percentage of fat, water, The results will be repeated two times in this sequence.
Memory function
It can store in memory data for 10 users (P0...P9), 5 previous weighing records for each user. After the results are
repeated two times, and when the "0000" symbols are displayed and begin to disappear gradually, press "SET" and the
"1" is displayed. Press "
Read carefully and save for future use!
" buttons to set the gender, the gender indicator will appear
". The age range is from 10 to 99 years. Press "SET" to confirm your age
". The height range is from 100cm to 250cm. Press "SET" to confirm your
" to select the previous measuring results in the memory.
" buttons to enter the number. You can input personal data for 10
- for men,
for women.
Advertisement
