You have bought a great new product from MAGICFX®. MAGIC FX is a Dutch manufacturer of professional special effects machines and equipment. We have been experts in special effects since our establishment in 1995. All our products are made under the brand name MAGICFX®...
User documentation MAGICFX® DMX FX Switch Pack 3. DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY (according to Annex II.1.A of the Machinery Directive) Concerning the Machinery Directive. We; MAGIC FX B.V. Schouwrooij 27 5281 RE Boxtel The Netherlands State under personal responsibility: We are the manufacturer of the product: ®...
MAGIC FX advises that the original of this user manual, including appendices, is kept at a safe and central place. It is best that another original or copy is kept close to the DMX FX Switch Pack at the workplace.
User documentation MAGICFX® DMX FX Switch Pack CONTENTS CONGRATULATIONS! ..................1 CE MARKING ....................2 DECLARATION OF CONFORMITY ..............3 FOREWORD ....................4 INTRODUCTION ....................6 DESCRIPTION AND APPLICATION OF THE DMX FX SWITCH PACK ......6 NECESSARY ACCESSORIES ....................6 VEILIGHEID .....................
Version 1.0 5. INTRODUCTION DESCRIPTION AND APPLICATION OF THE DMX FX SWITCH PACK The DMX FX Switch Pack is a switch system which has been especially developed for the safe switching on and off of electronic special effects equipment. Any use other than that described above excludes your supplier from any liability. NECESSARY ACCESSORIES The following parts belong to the DMX FX Switch Pack: MFX0308 –...
User documentation MAGICFX® DMX FX Switch Pack 6. VEILIGHEID INTRODUCTION The DMX FX Switch Pack has been designed and constructed in such a manner that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation.
Version 1.0 WARNINGS Warning texts have been attached to the DMX FX Switch Pack. With regard to these the following rules apply: These texts may not be removed or damaged. The operator must regularly check if this is the case. The operator must ensure that the texts are and remain clearly visible and legible.
User documentation MAGICFX® DMX FX Switch Pack 7. ONDERDELEN 1. Power input 9. Display 2. Power output 10. DMX Led 3. Power button 11. MENU button 4. DMX input 12. UP button 5. DMX output 13. DOWN button 6. Fuses 14.
W. http://www.magicfx.eu E. info@magicfx.eu 9. PREPARATIONS Unpack the DMX FX Switch Pack. Dispose of the packaging material without harming the environment. Inspect the machine for any damage. If damage is noticed this must be reported to MAGIC FX. Page 10...
User documentation MAGICFX® DMX FX Switch Pack 10. INSTALLATION CAUTION: The machine can be damaged if you do not follow the procedures carefully. DANGER WARNING: The MAGICFX® DMX FX Switch Pack may only be installed by adults and authorised persons. Ga bij het installeren van de DMX FX Switch Pack als volgt te werk: Mount the DMX FX Switch Pack in a truss system by means of 2 certified truss...
Page 13
Version 1.0 Connect the other end of the DMX cable (male plug) to the professional DMX controller. Take care that you always place the controller in such a position that the operator has full view of all the connected machines. Consult the DMX controller manual for instructions and safe use.
Page 14
User documentation MAGICFX® DMX FX Switch Pack The display will now show the screen pictured on the left. You will see the address behind Safety flash on and off. This is the address which can be used for releasing the machine. Change to the required mode by pressing on the ▲...
Version 1.0 11. USAGE TIP: Gives you suggestions and advice regarding easier or more convenient ways to carry out certain tasks. CAUTION: The machine can be damaged, if you do not follow these procedures carefully. DANGER WARNING: The MAGICFX® DMX FX Switch Pack may only be installed by adults and authorised persons.
User documentation MAGICFX® DMX FX Switch Pack 12. SWITCHING OFF To switch off the DMX FX Switch Pack, take the following steps: Ensure that the DMX FX Switch Pack is in safety mode (safety channel closed). Now remove all connected machines from the DMX FX Switch Pack.
To achieve the maximum service life of the DMX FX Switch Pack you must regularly clean the DMX FX Switch Pack and test if it is working correctly. Should the DMX FX Switch Pack not work for some reason then please contact MAGIC FX. DANGER WARNING: Do not replace parts yourself;...
Need help?
Do you have a question about the MFX3210 and is the answer not in the manual?
Questions and answers