Connection - QIMMIQ FREON Quick Start Manual

4.

Connection

Connecting the Smartphone to the Drone
1. Make sure the battery is connected to the Drone.
2. Wait until the motors initialize.
3. On your Smartphone, perform a search for available Wi-Fi® networks.
To do so, select Settings > Wireless & Networking > Wi-Fi.
> The list of available Wi-Fi networks is displayed.
4. Select "QIMMIQ-FREON".
5. Wait for your Smartphone to establish a connection with the Drone Wi-Fi network. This connection is usually
indicated by the appearance of the Wi-Fi logo on the screen of your Smartphone.
6. Launch the QUIMMIQ-FREON application.
> The welcome screen appears. You are connected.
PHOTOGRAPHY/VIDEO INSTRUCTIONS:
Before playing, please insert the SD card into the SD card slot, and make sure it connected correctly.
1. Take Photo:
Press the button on the rear left side of the transmitter, camera indicator lights in front the product will flash for on
second and photo was took in the meantime.
2. Take Video：
Press the button on the rear left side of the transmitter and hold on for 3 seconds then release, the camera starts to
take video and camera indicator lights in front of the product keep flashing. Press the button again, camera will stop
video work and indicators stop flashing.
Camera indicator lights.