Connecting Wires To Terminals - Kenwood KDC-W6031 Instruction Manual

Connecting Wires to Terminals

KENWOOD disc changer input
To connect the Disc changer,
consult your Disc changer
manual.
To External Display/
Steering remote
Fuse (10A)
Battery wire (Yellow)
Ignition wire (Red)
See next page
A-–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Rear right output (Red)/
Sub Woofer right output (Red)
Wiring harness
(Accessory1)
External amplifier control wire
(Pink/Black)
TEL mute wire (Brown)
If no connections are made, do
not let the wire come out from
the tab.
Power control/ Motor
antenna control wire
(Blue/White)
Rear left output (White)/
Sub Woofer left output (White)
Front left output (White)
Front right output (Red)
FM/AM antenna
input
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
To "EXT.AMP.CONT. " terminal of the
amplifier having the external amp
control function.
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
To connect the KENWOOD
navigation system, consult
your navigation manual.
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.
Antenna Cord (ISO)
33
|
English