Options - AEG L 79495 FL User Manual

Table of Contents

Advertisement

14
www.aeg.com
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Stains and Extra Rinse at
the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
7.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp. and Spin at the same
time until the indicator
goes off.

8. OPTIONS

8.1 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.2 Start/Pause
Press button Start/Pause to start or
interrupt a programme.
8.3 Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.4 Time Save
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for slightly soiled items
only.
Some programmes accept
only one of the two options.
You can activate this option:
• After you press Start/Pause : the
options and the programme knob are
locked.
• Before you press Start/Pause : the
appliance cannot start.
7.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Delay Start and Time Save at
the same time until the relevant
indicator comes on/goes off.
comes on/
8.5 Extra Rinse
With this option you can add some rinses
to some washing programmes, refer to
"Programme chart".
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
8.6 Stains
Set this option to add the stain phase to
a programme.
Use this option for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
8.7 Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
This option increases the
programme duration.
This option is not available
with a temperature lower
than 40 °C.
.

Advertisement

Table of Contents
loading

Table of Contents