Technaxx TX-55 User Manual
  1. Manuals
  2. Brands
  3. Technaxx Manuals
  4. IP Camera
  5. TX-55
  6. User manual
Technaxx TX-55 User Manual

Technaxx TX-55 User Manual

Easy ip-cam hd wireless
Hide thumbs
Table of Contents

Advertisement

Quick Links

Easy IP-Cam HD wireless TX-55
Security Camera HD powered by batteries for indoor and outdoor use
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive R&TTE 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom "Konformitätserklärung"). Before using
the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de
If you drill a hole in the wall, please make sure that power cables, electrical cords and/or
pipelines are not damaged. When using the supplied mounting material, we do not take the
liability for a professional installation. You are entirely responsible to ensure that the
mounting material is suitable for the particular masonry, and that the installation is done
properly. When working at higher altitudes, there is danger of falling! Therefore, use
suitable safeguards.
Content
Introduction .......................................................................................................................... 0
1.
Features ....................................................................................................................... 1
2.
Technical specifications ................................................................................................ 1
3.
Product View ................................................................................................................. 2
3.1
Front .......................................................................................................................... 2
3.2
Rear .......................................................................................................................... 2
4.
Setup Device ................................................................................................................ 2
4.1
Install Device ............................................................................................................. 2
4.2
Install Easy IP Battery APP ....................................................................................... 3
4.3
Add Camera from AP Mode ...................................................................................... 3
4.4
4.5
Resetting the device .................................................................................................. 6
4.6
MicroSD card and camera positioning ...................................................................... 6
4.7
Mounting ................................................................................................................... 6
5.
Monitor Easy IP Battery Camera .................................................................................. 7
5.1
Monitor Camera ........................................................................................................ 7
5.2
Monitor Event Detection ............................................................................................ 8
5.3
Event record list (Camera Record Management) ...................................................... 8
6.
Settings ......................................................................................................................... 9
6.1
Camera Setup ........................................................................................................... 9
6.2
Camera setting ........................................................................................................ 10
Technaxx
®
Delete) ...................................................................................... 6
* User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-55 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Technaxx TX-55

Summary of Contents for Technaxx TX-55

  • Page 1: Table Of Contents

    Easy IP-Cam HD wireless TX-55 Security Camera HD powered by batteries for indoor and outdoor use The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device, to which this user manual belongs, complies with the essential requirements of the standards referred to the Directive R&TTE 2014/53/EU.

  • Page 2: Features

    150.5g (without batteries) Weight / Dimensions (L) 11.2 x (W) 6.5 x (H) 7.4cm (with stand) Easy IP-Cam HD wireless TX-55, Camera chassis, 4x Package Contents screws & 3M adhesive stripe, Powerful magnet with iron plate, 4x CR123A batteries, User Manual Keep this manual for future reference or product sharing carefully.

  • Page 3: Product View

    TX-55 has a built-in WiFi network and can connect to your WiFi router directly. Therefore, for the first time of TX-55 use, you need to set up the WiFi network and assign to an available network (WiFi router) which is linked to the internet.

  • Page 4: Install Easy Ip Battery App

    4.2 Install Easy IP Battery APP Search and find the Easy IP Battery APP from the APP Store for iOS or the Google Play Store for Android. Then install it in your mobile device. Press the Easy IP Battery icon to start it. 4.3 Add Camera from AP Mode In the AP Mode, the Ready LED is flashing slowly in BLUE and the WiFi function is active.
  • Page 5 Press “Next” the device will be configured. After the TX-55 is set up, press “Finish” to complete. The Ready LED turns off and reboots the camera. Status LED flashing in Red within 10 sec. Then both the Ready and Status LED are on. If the configuration couldn’t finish press “Retry”...
  • Page 6 13. Shows the device name that is going to be configured. 14. Press “Finish” the device will be configured. After the TX-55 is set up the Ready LED turns off and reboots the camera. Status LED flashing in Red within 10 sec. Then both the Ready and Status LED are on.

  • Page 7: Delete Camera ( Delete)

    4.4 Delete Camera ( Delete) Press the Delete Camera icon to delete camera. Select the camera to delete & press button. 4.5 Resetting the device Push the Reset Button (~t 5 seconds and release it) to restore the default setting of camera in AP Mode.

  • Page 8: Monitor Easy Ip Battery Camera

    For mounting with the 3M adhesive first clean the magnet and the place you want to mount the camera with nail polish remover or alcohol. (Warning! Cleaning with alcohol or nail polish remover may damage the surface you are using.) Glue the 3M adhesive first to the magnet surface of the camera stand.

  • Page 9: Monitor Event Detection

    2. The record video clip save in the mobile device under "local\internal storage\DCIM\Technaxx\TEdeviceID @technaxx.iptnet.net\Recording" for Android. (iOS will save under local media in the Easy IP Battery APP. From there you can download the record to your device.) 5.2 Monitor Event Detection...

  • Page 10: Settings

    6. Settings 6.1 Camera Setup At the main page press the button and change to the next page. Camera Info: Here you can change the Camera Name. The Camera ID is unchanged. Firmware update is also possible. Local Media: Images and Clips that were taken manually are saved here. WiFi Setup: Configure the WiFi setup for your camera and select the WiFi network you want to connect your camera with.

  • Page 11: Camera Setting

    6.2 Camera setting At the main page press the button and change to the next page, Camera Setup. Press option to open the Camera Setting page. See the functions below. Camera Storage Check capacity Management MicroSD Card inserted in the camera.
  • Page 12 Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany...
  • Page 13 GPL v2 without charge except for the cost of media, shipping, and handling, upon written request to Technaxx GmbH & Co. KG, Kruppstraße 105, 60388 Frankfurt am Main, Germany.
  • Page 14 that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.
  • Page 15 works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
  • Page 16 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
  • Page 17 performance of the program is with you. Should the program prove defective, you assume the cost of all necessary servicing, repair or correction. 12. In no event unless required by applicable law or agreed to in writing will any Copyright holder, or any other party who may modify and/or redistribute the program as permitted above, be liable to you for damages, including any general, specia, incidental or consequential.

Table of Contents