To connect your TV to the restricted network:
1. Either during Guided Setup or after using the Settings > Network menu to set up a new
connection, the TV automatically detects that you are connecting to a restricted network and
displays the following prompt:
Tip: Your TV can connect to a restricted network only if Device connect is enabled in Settings
> System > Advanced system settings. (Device connect is enabled by default, but if you have
disabled it, the TV cannot complete the connection.)
Note: Device connect is not present if the TV is in non-connected mode.
2. If you selected the correct network, highlight I am at a hotel or college dorm, and then press
OK. The TV prompts you to use your smartphone, tablet, or laptop to complete the connection.
3. Use a phone, tablet, or wireless-enabled computer to detect wireless networks. In most cases,
you can simply open the device's Wi-Fi Settings or Network Settings screen to start scanning.
Note: The phone, tablet, or computer must be on the same wireless network to which you
are connecting the TV.
Page 37